Operation Manual

Operation
www.olympia-vertrieb.de
OPERATING
INSTRUCTIONS
29Page
Setup
The equipment can be setup individually for certain functions.
1. Select the Setup menu option and
confirm the selection.
2. The following menu options appear in the
display
S Date & Time
S Alarm
S Sleep
S Network
S Language
S Information
S Firmware Upgrade
S Reset All Settings
3. Select the menu option required and
confirm the selection.
Date & Time
Time synchronisation No/Yes
If the function is set to “TimeSync Yes”, time synchronisation occurs
automatically when the equipment is in operation at midday (12:00) and
midnight (00:00). The time is also synchronised each time the equipment is
switched on.
Note: A condition for synchronisation is that an internet connection exists.
Pay attention that you select the correct time zone (refer to Section Time
zone).
If the function is set to “TimeSync No”, the time must be set manually (refer
to Sections Date and Time).
Use the [OK] button to toggle between “TimeSync No” and “TimeSync Yes”.
Date
Set the date manually. Enter the correct value for the for the day. 
increases the value by 1,  decreases the value by 1. Confirm the value
set by pressing [OK]. Proceed in the same way for the month and year
values.
Time
Set the time manually. Enter the correct value for the for the hour. 
increases the value by 1,  decreases the value by 1. Confirm the value
set by pressing [OK]. Proceed in the same way for the minute value.
Time format
Use the [OK] button to toggle between the 12 and 24−hour clock.
Time zone
Select the required time zone and confirm it by pressing the [OK] button.
DST
Set summer time. Use the [OK] button to toggle between “DST No” (winter
time) and “DST Yes” (summer time). When “DST Yes” is active, the icon
appears in the display.


/ = 

