Operation Manual

Network
www.olympia-vertrieb.de
OPERATING
INSTRUCTIONS
9Page
Note: WEP − Wired Equivalent Privacy, WPA − Wi−Fi Protected Access.
An encryption system for networks. If you do not know the code (key),
contact the person who setup the network.
If the connection could not be established
because the code entered or other settings
are wrong, the corresponding message
appears in the display.
Entering characters
You are prompted to enter information when working in the various menus.
When you are in such a menu, turn the rotating [SCROLL] knob until the
character required is identified. Confirm the selection by pressing the
[SELECT] button.
If you have entered an incorrect character, delete it by pressing the [BACK]
button.
Note: Pay careful attention to upper and lower case when entering the code.
Connecting Via Ethernet (LAN)
You can also connect the radio to the network via the RJ45 connection port
(Ethernet). In this case, activate the ONLY WIRED network setting.
1. Turn the rotating [SCROLL] knob and
select the CONFIGURATION menu
option.
2. Press the [SELECT] button.
3. Turn the rotating [SCROLL] knob and
select the NETWORK SETTINGS menu
option.
4. Confirm the selection by pressing the
[SELECT] button.
5. Turn the rotating [SCROLL] knob and
select the WIRED/WIRELESS menu
option.
6. Confirm the selection by pressing the
[SELECT] button.
7. Turn the rotating [SCROLL] knob and
select the ONLY WIRED menu option.
8. Confirm the selection by pressing the
[SELECT] button.
Network error
Invalid key
< Network Settings >
< Wired/Wireless >
< Configuration >
Only Wireless
Auto
< Only Wired >