Operating instructions

16
Motor protection
The motor switches off automatically in the event of overloading. Pull out the mains plug
from the socket and allow the motor to cool down to room temperature. Plug the mains
cable back in and then continue operation.
Notes on care and maintenance
Caution:
Maintenance work may only be performed when the mains plug is pulled out.
Clean the housing with a slightly moist cloth.
Do not use any aggressive cleaning agents. Never use any chemicals (e.g. cleaning
solvent, alcohol) to clean the housing.
To ensure your shredder enjoys a long working life, we recommend to clear residual ma-
terial from the cutting units at regular intervals and apply special oil for paper shred-
ders to the cutting unit. You can purchase a special CFC-free oil from your specialist
retailer or directly from our Service Center in Hattingen. This will extend the service life
of the device.
Attention: It is forbidden to use oil spray bottles containing CFC!
Technical data
Model: PS 45 CCD
Power supply: 230 V/50 Hz
Cutting width of the paper slot: 220 mm
Cutting width of the CD slot: 120 mm
Cutting power: 10 DIN A4sheets (80 g/m²); 1 CD, 1 credit card
Shred size: 4 x 35 mm
Shred speed: 2.5 m/min
Waste bin volume: 21 l (0.8 l for CD bin)
Noise level: approx. 72 dB
Security level: 3
Max. power consumption: 1.6 A
Size (W x H x D): 360 x 244 x 400
Weight: 5 kg
Operating cycle paper/credit card: Intermittent operation 3 min. on / 40 min off
Operating cycle CD: Intermittent operation 3 min. on / 40 min off