Operation Manual

Operation

Activating/Deactivating the VOX feature (voice detection)

To activate/deactivate VOX",

press and hold the MODE button

until SET" appears in the display.

Press the UP or DOWN button un-

til VOX" appears in the display.

Use the FORWARD or BACK but-

ton to switch the VOX" function on

or off. Confirm the setting by pressing the PLAY/STOP button.

Recording

The device is equipped with an automatic voice activity detector (VOX) (refer

to Page 34 Voice activity detector (VOX)"). If VOX" is deactivated (see

above), you can record in the normal way.

Set the device to Standby mode

and select the recording quality re-

quired (refer to Page 30 Recor-

ding quality").

Select a file/memory location by

pressing the FILE/REPEAT button

(refer to Page 31 Managing mes-

sages").

If you remove the batteries while recording, the recording

is interrupted. The current recording may be impaired or erased.

The dictation machine requires a few minutes to be able to start re-

cording again in normal operation. ......" appears in the display du-

ring this period.

It is recommended to save your recordings on a PC or external data

media.