Operating instructions

Operation

Managing messages

The device has 4 files, named A, B, C and D, in which to store the messages.

You can store a total of 200 messages or 467 minutes in LP mode using all

the files (refer to Recording quality", Page 37). A max. of 99 messages can

be recorded per file. Proceed as follows to select a file:

Press the REC/STOP  or PLAY/

STOP

 button to activate Standby

mode.

Press the FILE/TIME button  to

select the required file/memory

location (A, B, C, D). The number

in the top right corner of the display

indicates the total number of messages recorded. The time at the bottom of

the display indicates the total recording time of the message selected.

Note: Each time a message is recorded, the device generates a consecutive

number, starting with 1 for the first message recorded, which appears in the

display. If no more memory space is available, FULL" appears in the display.

Refer to Page 44 to learn how to erase messages.

Recording sensitivity

Slide the MIC SENS control to

LOW to record sounds which are

very close to the microphone. Slide

the control to HIGH to make re-

cordings of sounds further away

from the microphone.

Hold function (key lock)

Slide the HOLD control to LOCK to

deactivate all the buttons. HOLD’’

appears in the display. Slide the

HOLD control to OFF to activate all

the buttons again.