OLY MPIA CM 70 Quick Reference SINCE 1903 www.olympia-vertrieb.
Quick Reference CM 70 Cash Register Declaration of Conformity CM 70 G The manufacturer hereby declares that the equipment complies with the stipulations defined in the following guidelines and standards: D Der Hersteller erklärt hiermit, dass das Gerät mit den Bestimmungen der Richtlinien und Normen übereinstimmt: F Le fabricant déclare par la présente que l'appareil est conforme aux règlements et normes en vigueur: E Por medio de la presente, el fabricante declara que este aparato está conforme
Quick Reference CM 70 Cash Register Intended use This cash register is exclusively intended for processing cash register business indoors. Any other use is considered unintended use. General information / Safety notes • Ensure that the mains power supply corresponds to that specified on the rating plate located on the rear side of the cash register. • This cash register is a highly sophisticated piece of equipment. Never attempt to repair it yourself.
Quick Reference CM 70 Cash Register This Quick Reference manual only provides basic information. For more detailed information, please refer to the operating instruction manual. Inserting a paper roll Remove the printer lid. Insert a paper roll of 57 mm width and max. 70 mm diameter. Do not use recycled paper because this causes the printer to wear more quickly. Prepare the paper roll for insertion.
Quick Reference CM 70 Cash Register Changing the colour ribbons Note: Only use original colour ribbons (Group 744). 1. 2. 3. 4. Open the printer lid. Lift out the colour ribbon using the grip (left). Insert a new colour ribbon in the guide. Close the printer lid. Key-operated switch The key must be set to position REG for normal operation (registration).
Quick Reference CM 70 Cash Register Printing the system settings The settings in respect of system options, discount, foreign currency as well as Z-report and clerk password are printed.
Quick Reference CM 70 Cash Register Programming departments (DEP) Example 1: DEP1 is an itemised department at tax rate 1 (16%) and without a fixed price.
Quick Reference CM 70 Cash Register Example: PLU12 for 2.50 EUR belongs to department 1. 1. PLU price and assignment: Set the key to PRG h Press Enter the required PLU number, f . confirm by pressing Now enter the PLU fixed price and the department assignment by A Input Display h P001 0,00 12 P12 0,12 f 250 2,50 A . pressing department key The next PLU automatically appears in the display. Proceed in the same way.
Quick Reference CM 70 Cash Register The digits for this setting are entered in the following way for programming purposes: Enter the and confirm by pressing k. The following digits are then entered in succession without any spaces or other intermediate characters: The entry of these digits is confirmed by pressing the q key. Example: EURO to US Dollars (1 USD = 0.76494 EURO) as foreign currency no.
Quick Reference CM 70 Cash Register - Table, continued Note: The standard settings appear in bold print. System option no. Status no.
Quick Reference CM 70 Cash Register Registration according to PLU numbers Enter the PLU number (max. 3 digits) PLU number E.g. 12 PLU f Or: If the same PLU should be registered several times: No. of PLUs PLU h NN E.g. PLU 12 f The sum of NN x PLU price is limited to the maximum capacity of the cash register. Or: When a PLU is being used which has been programmed with free pricing: PLU no. E.g.
Quick Reference CM 70 Cash Register Error correction and void Faulty registrations can be corrected immediately after entry or later in the transaction. Error correction (direct): The last item entered during a registration can be corrected directly. V Correction is completed Void (designated correction): Errors in amounts, PLU prices and department prices in transaction entered previously can be corrected during the registration.
Quick Reference CM 70 Cash Register Printing reports X-reports: Without memory deletion. Z-reports: With memory deletion. Set the key to X (to print X-reports) or Z (to print Z-reports) as necessary. Report type: Start printout with Day's X and Z financial report q f R 99q 88q Day's X and Z PLU report X and Z clerk report Monthly X2 and Z2 financial report X and Z training report Sample receipt: day's Z1 financial report 13･12･2004 1 2 002 1Z 003-350･00 1TX 001-100･00 2TX 450.00 ST 41.37 1TX 258.
Quick Reference CM 70 Cash Register Deletion function: Reset Grand Total and Z-Counter Start Training mode: Set the key to PRG 2 and 0 keys. Conclude by pressing c. Press the Input Display Confirm by pressing 20 20 c Proceed as follows to reset the cash register to its initial state and clear all the programmed values: 1. Disconnect the cash register power plug. 2. Open the battery compartment and remove the three AA batteries. 3.
Quick Reference CM 70 Cash Register Printer malfunction In the event of a printer error, switch off the cash register immediately and disconnect the power plug. Check whether the paper roll is inserted correctly or there is a foreign body in the printer mechanism. Remove it, if present. Caution: Remove the foreign body very carefully. Do not use a knife, screwdriver or anything similar. Never use force. This could damage the printer mechanism.
