Specifications

９
If the Ec (Chain) or the Ed (Double) Error message occurs frequently, slowly
and carefully turn the Thickness Adjustment Screw in a counter-clockwise
direction (loosen).
If the feeding operation does not go smoothly, slowly and carefully turn the
Thickness Adjustment Screw clockwise (tighten).
Counterfeit Detection Functions (Optional).
Throughout these optional detection functions, the machine will stop when a
counterfeit note is detected.
Ultraviolet (UV) Detection Function (Optional).
A counterfeit note that generates extra fluorescence, when under the UV
light
source, can be detected if this function is selected. The machine will
stop with the Error message CF1 shown on the Batch Number Display under
this condition.
The
UV Detection Function can be selected by press the UV Key when the
“code” key is ON. the sensitivity of the UV function can be selected at the
same time.
Notes
: Three different UV sensitivities can be selected on this model, U-3 is
the highest and U-1 is the lowest sensitivity. Sequentially pressing the UV
key will select the sensitivity.
The machine will stop whenever a suspected counterfeit note is detected,
take the suspect note out from the Stacker for detailed checking. Press the
START key to clear the Error message and recount all of the notes once
again.
MG Detection Function (Optional).
Through the MG function, the unit can detect suspected counterfeit notes
that
are lacking the magnetic ink, or metallic thread properties. When a
suspected counterfeit is detected, the machine will stop with the Error
Message CF2 displayed.
The
MG Detection function is enabled by pressing the MG key when the
“code” key is ON, and a small indicator will also illuminate. To disable the