Specifications

１１
5. CLEANING AND MAINTENANCE
Many of the sensors that applied on this machine are optical devices. These
are used to detect the presence of notes in the Hopper, notes in the Stacker,
or are used in the bank note counting process. Consequently, paper particles,
dust, dirt, etc., may cause miscounting or, in a serious condition, failure of the
start-up internal self-testing procedures.
Notes
:
 NEVER attempt cleaning the machine when machine is power on.
Always totally disconnect the unit from the mains supply.
 Do NOT use chemicals for cleaning the machine.
 To keep the machine in good condition, it is necessary to clean all
the
sensors with a clean, dry brush. Ideally, cleaning is
recommended at the end of each working day.
 The Top Cover of the unit, carrying the bank note drop/loading
illustration,
can be removed for access/cleaning. Only ever
attempt this with electrical power removed from the machine.
 No parts of this unit are maintainable by the user. The use of any
oils,
or greases, on any of the feed mechanism rubber component
parts, could seriously effect the operation of the unit and must be
avoided at all costs.