Operating instructions

36
6.2.3 Changing the cutting head
When the blades in the cutting head are damaged or worn, the cutting head
must be replaced.
Note: Only the entire cutting head can be replaced. To obtain a new
cutting head, please telephone our hotline.
1. Turn the red rotating knob located at the end of the guide rail 90º
clockwise or counterclockwise and pull the guide rail from the device.
2. Replace the old cutting head with a new one
3. Slide the guide rail back in the device and turn the red rotating knob 90º
back clockwise or counterclockwise.
Fig. 3