Operating instructions

33
6.1.3 Clearing jammed lamination foil
The device is equipped with an ABS switch (anti-blocking sliding switch) to
clear foil jams quickly.
Proceed as follows if the lamination foil jams:
1. Switch the device off: Set the On/Off switch to
OFF.
2. Slide the ABS switch fully to the left.
3. Hold the laminator firmly and pull the lamination foil together with the
document to be laminated out of the laminator's infeed.
4. Slide the ABS switch fully to the right.
5. Clean the transport rollers of any deposits and residual adhesive by
inserting a folded piece of paper in the laminator infeed, refer to Chapter
"Cleaning the transport rollers".
Note: If foil jams occur repeatedly or jammed foil cannot be removed
from the laminator, please contact our hotline (refer to Guarantee).