IP Camera with Receiver IC 1285 Z …easy to operate using the "ProHomeIPC" app from Olympia Operating Manual 11.
Contents Contents General Information . . . . . . . . . . . . General Safety Information . . . . . . . . Intended Use . . . . . . . . . . . . . . . . . . . . Unintended Use . . . . . . . . . . . . . . . . . Legal Notice . . . . . . . . . . . . . . . . . . . . Notations Used in this Manual . . . . . System Requirements . . . . . . . . . . . . iOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Android . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Connecting the Smartphone/Tablet PC to the Camera . . . . . . . . . . . . . . . 18 Using the ProHomeIPC App . . . . . 20 Operating the Camera (iOS) . . . . . Moving the Screen Section . . . . . . . . Opening the Menu Bar . . . . . . . . . . . Buttons in the Menu Bar . . . . . . . . . . 22 22 22 23 Push to Talk . . . . . . . . . . . . . . . . . . . . . . . . . . Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving Image Sections as a Preset . . . . . .
Contents Operating the Camera (Android) . Moving the Screen Section . . . . . . . . Opening the Menu Bar . . . . . . . . . . . Buttons in the Menu Bar . . . . . . . . . . Push to Talk . . . . . . . . . . . . . . . . . . . . . . . . . . Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving Image Sections as a Preset . . . . . . Activating Night Vision . . . . . . . . . . . . . . . . . Flipping the Image Section Horizontally . . Flipping the Image Section Vertically . . . .
General Information General Safety Information General Information Please read and observe the following information and keep this operating manual in a safe place for future reference! CAUTION! • Risk of hearing damage! The audio signals are emit ted through a loudspeaker. Pay attention that a reason able loudspeaker volume is set for transmitting the audio signals.
General Information Intended Use and Notations Used in this Manual Intended Use Legal Notice The IP camera (subsequently referred to as the camera) is designed to perform video surveillance (CCTV) by day and night. The camera is exclusively intended for use in closed rooms. When installing and selecting the area of application of the camera, pay attention to the personal rights of third-parties and that the respective, applicable local laws and regulations are not violated.
General Information System Requirements System Requirements This operating manual assumes users have a basic knowledge of connecting and configuring network-capable devices and smartphones or tablet PCs.
General Overview Checking the Package Contents General Overview Connections and Operating Elements This section provides information on the package contents as well as the connections and operating elements on the camera. Before connecting the camera, familiarise yourself with the connections and operating elements on it. Checking the Package Contents 1 Brightness sensor 2 Microphone 3 Infrared LEDs (night vision) Unpack the camera and check that the package contents are complete.
General Overview Connections and Operating Elements 10 G
General Overview Receiver Receiver Pivoting Range and Angle of Vision 15 Power cable (connect to power connection port on the camera) 16 Power adapter connection port 17 I/O port 18 Status LED (not illustrated here) G A Vertical pivoting range B Horizontal pivoting range C Angle of vision 11
Connecting the Camera Inserting the MicroSD, Positioning or Mounting the Camera Connecting the Camera Positioning the Camera This section provides information on how to position and connect the camera and insert a microSD memory card in it. When the camera is put into operation for the first time, it must be connected to a network connection port (LAN) on your router via the network cable. Therefore, when putting the camera into operation for the first time, it should be located near your router.
Connecting the Camera Connecting the Camera 1. Drill two sufficiently large holes in the wall. Use the mounting bracket supplied as the template for the position of the holes. More detailed information on the DHCP function is provided in the operating manual supplied with your router. Connecting the Camera Power Adapter and Receiver 2. Insert the dowels in the drill holes. 3. Assemble the mounting bracket using suitable screws. 4. Fit the camera on the mounting bracket.
Connecting the Camera Registering the Receiver on the Alarm System 3. Connect the power adapter to the power connection port (17) on the receiver and a properly installed, easily accessible power socket. Registering the Receiver on the Alarm System The LEDs on the network connection port (10) signal when a connection exists to the network (lights up orange) and that data is being transmitted (flashes green).
Connecting the Camera Registering the Receiver on the Alarm System Communication Camera + Sensor Network Cable G Alarm System Router 15
Connecting the Camera Use Without an Alarm System The LEDs on the network connection port (10) signal when a connection exists to the network (lights up orange) and that data is being transmitted (flashes green). Use Without an Alarm System If you want to use the camera without an alarm system (Protect Series 6xxx / 9xxx alarm system from Olympia), you do not need the receiver supplied.
Connecting the Camera Installing the ProHomeIPC App Installing the ProHomeIPC App 1. Download the ProHomeIPC App from the App Store or Google Play Store. 2. Enable the ProHomeIPC App access to the camera of your smartphone or tablet PC and mobile internet. This simplifies connecting the camera and ProHomeIPC App and also enables remote access to the camera via the smartphone or tablet PC.
Connecting the Smartphone/Tablet PC to the Camera Installing the ProHomeIPC App Connecting the Smartphone/Tablet PC to the Camera The following conditions must be fulfilled in order that you can use the camera: You have downloaded and installed the ProHomeIPC App as described in Section Installing the ProHomeIPC App. You have set-up and connected the camera as described in Section Connecting the Camera. You smartphone or tablet PC is in the same network as the camera. 1. Start the ProHomeIPC App. 2.
Connecting the Smartphone/Tablet PC to the Camera Installing the ProHomeIPC App The ProHomeIPC App automatically searches for all the cameras available in the network. If your smart phone or tablet PC is connected in the same network as the camera, the camera is displayed (together with the user identifier and IP address). Alternatively, touch the camera displayed. 5. Enter the camera's password (security code). When the default settings are set, the password is admin. 6.
Using the ProHomeIPC App Installing the ProHomeIPC App Using the ProHomeIPC App Familiarise yourself with how to use the ProHomeIPC App. 2. Tap your finger on the display of your smartphone or tablet PC to open the submenus and activate functions. 1. Swipe your finger in any direction over the display of your smartphones or tablet PC to move the screen sec tion displayed. Alternatively, touch the green direction arrows to move the screen section displayed.
Using the ProHomeIPC App Installing the ProHomeIPC App 3. Zoom the image displayed on the display of your smart phone or tablet PC by touching the image section with two fingers and spreading them apart accordingly. Move your fingers in the opposite direction to reduce the size of the image. Alternatively, touch the magnifying glass icons to zoom the image displayed in or out accordingly. G 4. Rotate your smartphone or tablet PC on its side. The image then appears as a full screen display.
Operating the Camera (iOS) Moving the Screen Section Operating the Camera (iOS) Moving the Screen Section Opening the Menu Bar Swipe your finger in any direction over the display of your smartphone or tablet PC to move the screen section dis played. Touch your finger on the smartphone or tablet PC screen. A menu bar opens at the bottom edge of the screen. A function is assigned to each button in the menu bar. Touch one of the buttons to activate the function or, if necessary, define settings.
Operating the Camera (iOS) Buttons in the Menu Bar Buttons in the Menu Bar Snapshots This section provides information on which functions are assigned to the buttons in the menu bar while a live pic ture is on screen and what you can do with them. You can take a photo of the live image currently scanned by the camera. Push to Talk The camera is equipped with a loudspeaker which can be used to issue vocal communication or sounds spoken or played in your smartphone or tablet PC. 1.
Operating the Camera (iOS) Buttons in the Menu Bar Saving Image Sections as a Preset Quick Access You can divide the image of the entire area under surveil lance (limited by the angle of detection and pivoting range of the camera) into different sections and save the sec tions individually as presets. A total of four presets are possible. Each preset can then be assigned to a defined memory location • to be accessed quickly. 1. Touch one of the memory locations.
Operating the Camera (iOS) Buttons in the Menu Bar Activating Night Vision If the brightness of the area being monitored falls below a certain level, the infrared LEDs are automatically activat ed. The infrared LEDs serve as a residual light amplifier so that the area monitored is illuminated despite the dark and can continue to be monitored. The live image displayed appears in black and white. 3. Touch this button to deactivate automatic night vision.
Operating the Camera (iOS) Buttons in the Menu Bar Flipping the Image Section Vertically You can flip (mirror) the live image displayed about the vertical axis. This can be useful, for example, when the camera is mounted in such a way that parts of the area under surveillance lie in a blind spot. 1. Touch the Video Quality button. 2. Touch the setting required. 1. Touch the Flip vertical button. The current live image displayed is flipped about the vertical axis.
Operating the Camera (iOS) Start Screen of the ProHomeIPC App Start Screen of the ProHomeIPC App When a camera has been found and integrated success fully in the ProHomeIPC App, the corresponding camera is displayed on the start screen. In this view, all the cameras integrated in the ProHomeIPC App are displayed. We recommend that you assign each camera con nected an unambiguous name (refer to Section Name).
Operating the Camera (iOS) Context Menu of the ProHomeIPC App Context Menu of the ProHomeIPC App At the bottom edge of the start screen are four buttons which can be used to complete different settings and func tions. 1. Touch the respective button to define the setting or start the function. Device Event Add Device Info The settings or functions assigned to the individual but tons are described in the following sections.
Operating the Camera (iOS) Camera List Camera List The Device button is normally active when you open the ProHomeIPC App. 1. Touch Device. A list of all the cameras integrated in your smartphone app is displayed. If you touch one of the cameras listed, the live image from the camera selected is displayed. You can move the image section displayed and use the but tons available in the menu bar (refer to Moving the Image Section and Buttons in the Menu Bar).
Operating the Camera (iOS) Event Event This button provides the option of displaying a list of events which the camera has recorded and saved in chronological order. 1. Touch Event. 2. Touch the camera whose recorded events you want to display. If no event has (yet) been recorded, the No result found message appears. You can define specific periods of time in the chronologi cal list of events in order to limit the events displayed to a certain time range. 3. Touch Search. 4.
Operating the Camera (iOS) Add Device Add Device You have the possibility of connecting new cameras using the ProHomeIPC App. All the cameras connected are displayed on the start screen. 1. Touch Add Device.
Operating the Camera (iOS) Add Device QR Code 1. Touch QRCode. 2. Scan the QR code on the rear of the camera using your smartphone or tablet PC. 3. Enter the camera's password (security code). When the default settings are set, the password is admin. 4. Save the settings by touching Save. Your camera is now listed in the overview of cameras available. The first time you attempt to select your camera, you will be requested to change the camera's password for reasons of security.
Operating the Camera (iOS) Add Device Automatic Search The ProHomeIPC App automatically searches for all the cameras available in the network. If your smartphone or tablet PC is connected in the same network as the cam era, the camera is displayed (together with the unambigu ous user identifier UID and IP address). 1. Touch the camera displayed. 2. Enter the camera's password. When the default settings are set, the password is admin. 3. Save the settings by touching Save.
Operating the Camera (iOS) Add Device Connecting Manually You can also connect your camera to the ProHomeIPC App manually. 1. Touch Add. 2. Enter the user identifier (UID), the name and password of the camera. The user identifier (UID), the name and password are on the rear of the camera. Your camera is now listed in the overview of cameras available. The first time you attempt to select your camera, you will be requested to change the camera's password for reasons of security.
Operating the Camera (iOS) Version Information Version Information It is possible to display detailed information on the version of the ProHomeIPC App. The version information changes with each time the app is updated. 1. Touch Info. Information on the current version of the ProHomeIPC App is displayed.
Operating the Camera (iOS) Deleting Cameras Deleting Cameras It is possible to delete individual cameras from the ProHomeIPC App. All personally defined settings are stored locally on the camera. If you want to reconnect cameras deleted from the list to your smartphone or tablet PC at a later point in time, the personally defined settings are reactivated. This does not apply if the settings have been defined from another smartphone or tablet PC. The modified settings are activated in such cases. 1.
Operating the Camera (iOS) Settings Settings You can use this menu to define the various functions and settings which control the way in which the camera be haves. The Settings menu is arranged into four areas. Camera Advanced Settings Alarm Settings Time Settings 1. Touch the arrow to the right beside the required cam era. The following settings only affect the respective cam era selected. Information on particular, individual fea tures is provided at the respective point.
Operating the Camera (iOS) Settings Camera This area contains information on the unambiguous user identifier (UID), the camera password and the name of the camera.
Operating the Camera (iOS) Settings User Identifier (UID) The camera's user identifier serves to identify the camera within the network. The user identifier cannot be changed.
Operating the Camera (iOS) Settings Name The name of the camera is displayed on the ProHomeIPC App start screen. This enables you to simplify the assignment of your cam era if you have connected several cameras to the ProHomeIPC App. You should assign each camera an unambiguous name, such as Living room, Office or Workshop. 1. Touch the field beside the Name option. Example Camera 2. Change the name of the camera.
Operating the Camera (iOS) Settings Password The camera password protects the camera from access by unauthorised third-parties. For reasons of security, we recommend that you change the camera password when you put it into operation for the first time (refer to Security Set tings). For reasons of security, the characters entered are en crypted.
Operating the Camera (iOS) Advanced Settings Advanced Settings This option provides various functions and settings with which you can define how the camera behaves according to your own individual requirements. Security code settings WiFi settings SD card settings Device information. Example Camera 1. Touch Advanced Setting.
Operating the Camera (iOS) Advanced Settings Security Code This menu option enables you to change the camera security code. The camera's security code protects the camera from access by unauthorised third-parties. For reasons of security, we recommend that you change the camera security code when you put it into operation for the first time. 1. Touch Security Code in the Advanced Setting menu. TEST WLAN 2. Enter the existing security code. When the default settings are set, the password is admin. 3.
Operating the Camera (iOS) Advanced Settings WiFi This menu enables you to see the wireless network with which your camera is connected. Proceed as follows to connect your camera to another wireless network: 1. Touch WiFi in the Advanced Setting menu. 2. Touch the arrow on the right to open a list containing all the wireless networks available in the vicinity. 3. Touch the network to which you want to connect your camera. TEST WLAN 4. Enter the WiFi password of the network selected.
Operating the Camera (iOS) Advanced Settings Formatting the MicroSD Memory Card This menu enables you to format the microSD memory card inserted in the camera. 1. Touch SDCard in the Advanced Setting menu. 2. Touch SDCard and confirm the prompt. The microSD memory card is formatted. Any events and snapshots already stored on the microSD memory card will be deleted.
Operating the Camera (iOS) Advanced Settings About Device This menu option provides information on the model name of the camera, the firmware version on the camera, the camera manufacturer, the total memory space on the microSD memory card inserted and the memory space available on the microSD memory card inserted. TEST WLAN No settings can be changed in this area. If you have not inserted a microSD memory card in the camera, 0 MB appears for Total Size and Free Size. 1.
Operating the Camera (iOS) Alarm Setting Alarm Setting This area contains various information and settings op tions with which to define the alarm settings of the camera and ProHomeIPC App. 1. Touch Alarm Setting. Your smartphone or tablet PC can be set-up to issue an acoustic signal on detecting a movement. To do this, activate the Push Notification option in the ProHomeIPC App in the settings options provided in smartphone or tablet PC.
Operating the Camera (iOS) Alarm Setting Guard This option is used to define whether surveillance by the camera should be activated or not. If the Guard function is active, a recording is made of the area under surveil lance and you are alerted to an alarm situation by an acoustic alarm and Push Notification on your smartphone or tablet PC according to the settings defined. 1. Touch the Switch icon beside the Guard option. The Switch icon indicates it is ON.
Operating the Camera (iOS) Alarm Setting Motion Detection You can select from the list how sensitive the camera should react to movements in the area under surveillance. In the case of a static image, we recommend the High setting, in the case of possibly recurrent movements (such as a pet or clouds), we recommend the Medium or Low setting in order to prevent false alarms. 1. Touch Motion Detection in the list. 2. Touch the setting required. The setting is saved.
Operating the Camera (iOS) Alarm Setting Receiver Use this menu to define whether the receiver is active or not. A condition for successful activation of this function is that you have connected the receiver to your camera and registered it on your alarm system. When this function is activated, the camera receives a signal from the alarm system in the event of an alarm. Your camera starts to record the area under surveillance and, at the same time, sends a push notification to your smartphone or tablet PC.
Operating the Camera (iOS) Alarm Setting Alarm Preset You can use this menu to define which of the image sec tions saved should be permanently monitored (refer to Saving Image Sections as Presets). A condition for the successful use of this function is that the Guard function is active. 1. Save at least one image section on one of the four memory locations available (refer to Saving Image Sections as Presets). TEST WLAN 2. Touch Alarm Preset in the list. 3.
Operating the Camera (iOS) Alarm Setting Alarm SD Record You can use this option to define whether the recordings made should be saved on the microSD memory card in serted or not. A condition for the successful use of this function is that you have inserted a microSD memory card in your camera (refer to Inserting a MicroSD Memory Card). 1. Touch the Switch icon beside the Alarm SD Record option. The Switch icon indicates it is ON.
Operating the Camera (iOS) Alarm Setting Push Notification You can use this option to define whether the ProHomeIPC App push notifications should be sent to your smartphone or tablet PC when the camera detects movements or the alarm system connected is triggered. A condition for the successful activation of this func tion is that the transmission of push notifications has been enabled in the system settings on the smart phone or tablet PC.
Operating the Camera (iOS) Time Setting Time Setting This option provides information and functions regarding the time settings used. 1. Touch Time Setting in the Settings menu. 2. Define the respective settings as required. When the default settings are active, the time and date stamp displayed in the live image reflect the time and date provided by the network connected.
Operating the Camera (Android) Moving the Screen Section Operating the Camera (Android) Moving the Screen Section Opening the Menu Bar Swipe your finger in any direction over the display of your smartphones or tablet PC to move the screen section dis played. Touch your finger on the smartphone or tablet PC screen. A menu bar opens at the bottom edge of the screen. A function is assigned to each button in the menu bar.
Operating the Camera (Android) Buttons in the Menu Bar Buttons in the Menu Bar Snapshots This section provides information on which functions are assigned to the buttons in the menu bar while a live pic ture is on screen and what you can do with them. You can take a photo of the live image currently scanned by the camera. Push to Talk The camera is equipped with a loudspeaker which can be used to issue vocal communication or sounds spoken or played in your smartphone or tablet PC. 1.
Operating the Camera (Android) Buttons in the Menu Bar Saving Image Sections as a Preset Quick Access You can divide the image of the entire area under surveil lance (limited by the angle of detection and pivoting range of the camera) into different sections and save the sec tions individually as presets. A total of four presets are possible Each preset can then be assigned to a defined memory location • to be accessed quickly. 1. Touch one of the memory locations.
Operating the Camera (Android) Buttons in the Menu Bar Activating Night Vision If the brightness of the area being monitored falls below a certain level, the infrared LEDs are automatically activat ed. The infrared LEDs serve as a residual light amplifier so that the area monitored is illuminated sufficiently despite the dark and can continue to be monitored. The live image displayed appears in black and white. 3. Touch this button to deactivate automatic night vision.
Operating the Camera (Android) Buttons in the Menu Bar Flipping the Image Section Vertically You can flip (mirror) the live image displayed about the vertical axis. This can be useful, for example, when the camera is mounted in such a way that parts of the area under surveillance lie in a blind spot. 1. Touch the Video Quality button. 2. Touch the setting required. Repeat this step until the camera reacts to the move ment commands issued via the ProHomeIPC App without any delay. 1.
Operating the Camera (Android) Start Screen of the ProHomeIPC App Start Screen of the ProHomeIPC App When a camera has been found and integrated success fully in the ProHomeIPC App, the corresponding camera is displayed on the start screen. All the cameras integrated in the ProHomeIPC App are displayed in this view. We recommend that you assign each camera con nected an unambiguous name (refer to Section Name).
Operating the Camera (Android) Add Device Add Device You have the possibility of connecting more cameras by means of different processes using the ProHomeIPC App. All the cameras connected are displayed on the start screen. 1. Touch Click here to add camera.
Operating the Camera (Android) Add Device QR Code 1. Touch Scan. 2. Scan the QR code on the rear of the camera using your smartphone or tablet PC. 3. Enter the camera's security code. When the default settings are set, the security code is admin. 4. Save the settings by touching OK. Your camera is now listed in the overview of cameras available. The first time you attempt to select your camera, you will be requested to change the camera's security code for reasons of security.
Operating the Camera (Android) Add Device Automatic Search The ProHomeIPC App automatically searches for all the cameras available in the network. If your smartphone or tablet PC is connected within the same network as the camera, the camera is displayed (together with the unam biguous user identifier UID and IP address). 1. Touch Search. 2. Touch the camera required. 3. Enter the camera's security code. When the default setting are set, the security code is admin. 4. Save the settings by touching OK.
Operating the Camera (Android) Add Device Connecting Manually You can also connect your camera to the ProHomeIPC App manually. 1. Enter the user identifier (UID), the name and security code of the camera. 2. Save the settings by touching OK. The user identifier (UID), name and security code are on the rear of the camera. Your camera is now listed in the overview of cameras available.
Operating the Camera (Android) Context Menu of the Camera Context Menu of the Camera You can use the start screen to open the context menu of the connected cameras individually. 1. Touch the arrow to the right of the camera name to open the respective context menu. The context menu is opened. The context menu contains five options. The individual options are described in the following sections.
Operating the Camera (Android) Context Menu of the Camera Reconnect Should problems arise involving the connection, you can connect the camera again using the ProHomeIPC App. 1. Touch Reconnect. The camera selected is reconnect ed. You cannot access the camera while this process is in progress.
Operating the Camera (Android) Context Menu of the Camera View Event This option enables you to display a list of events which the camera has recorded and saved in chronological or der. 1. Touch View Event. If no event has (yet) been recorded, the No result found message appears. You can define specific periods of time in the chronologi cal list of events in order to limit the events displayed to a certain time range. 2. Touch the magnifying glass icon at the top right. 3.
Operating the Camera (Android) Context Menu of the Camera View Snapshot This option enables you to display a list of snapshots which you have taken with the camera and saved in chronological order. 1. Touch View Snapshot. A list of the snapshots available is displayed. If no snapshot has (yet) been recorded, the No snapshot found message appears. 2. Touch one of the snapshots. The snapshot selected appears in a full screen display. You can delete the selected snapshots from the collection saved. 3.
Operating the Camera (Android) Context Menu of the Camera Remove Camera It is possible to delete individual cameras from the ProHomeIPC App. All personally defined settings are stored locally on the camera. If you want to reconnect cameras deleted from the list to your smartphone or tablet PC at a later point in time, the personally defined settings are reactivated. This does not apply if the settings have been defined on another smartphone or tablet PC. The modified settings are activated in such cases.
Operating the Camera (Android) Context Menu of the Camera Edit Camera Various functions and settings can be defined in the Edit Camera menu to adapt the way the camera responds to your own specific needs. 1. Touch Edit Camera.
Operating the Camera (Android) Edit Camera Edit Camera You can use this menu to define the various functions and settings which control the way in which the camera be haves. The Edit Camera menu is arranged into four areas. Device Setting Advanced Setting Alarm Setting Time Setting The following settings only affect the respective cam era selected. Information on particular, individual fea tures is provided at the respective point. Some menus contain entries behind which is a small arrow.
Operating the Camera (Android) Edit Camera Device Setting This menu option provides information on the unambiguous user identifier (UID), the camera's security code and the name of the camera.
Operating the Camera (Android) Edit Camera User Identifier (UID) The camera's user identifier serves to identify the camera unambiguously within the network. The user identifier cannot be changed.
Operating the Camera (Android) Edit Camera Security Code The camera security code protects the camera from ac cess by unauthorised third-parties. For reasons of security, we recommend that you change the camera's security code when you put the camera into operation for the first time (refer to Se curity Settings). For reasons of security, the characters entered are en crypted.
Operating the Camera (Android) Edit Camera Name The name of the camera is displayed on the ProHomeIPC App start screen. This enables you to simplify the assignment of your cam era if you have connected several cameras to the ProHomeIPC App. You should assign each camera an unambiguous name, such as Living room, Office or Workshop. 1. Touch the field beside the Name option. 2. Change the name of the camera. TEST WLAN 3. Save the settings by touching OK.
Operating the Camera (Android) Advanced Setting Advanced Setting This option provides information and functions regarding the following settings. This option provides various functions and settings with which you can define how the camera behaves according to your own individual requirements. Security Setting Wi-Fi Setting Device Information 1. Touch Advanced in the Advanced Setting menu.
Operating the Camera (Android) Advanced Setting Security Setting This menu option enables you to change the camera's security code. The camera security code protects the camera from ac cess by unauthorised third-parties. For reasons of security, we recommend that you change the camera security code when you put the camera into operation for the first time. 1. Touch Modify Security Code in the Security Setting menu. 2. Enter the existing security code.
Operating the Camera (Android) Advanced Setting Wi-Fi Setting This menu enables you to see the wireless network with which your camera is connected. Proceed as follows to connect your camera to another wireless network: 1. Touch Manage Wi-Fi networks in the Wi-Fi Setting menu. TEST WLAN Connected 2. Touch the arrow on the right to open a list containing all the wireless networks available in the vicinity. 3. Touch the network to which you want to connect your camera. 4.
Operating the Camera (Android) Advanced Setting Device Information This menu option provides information on the model name of the camera, the firmware version on the camera, the camera manufacturer, the total memory space on the microSD memory card inserted and TEST WLAN Connected the memory space available on the microSD memory card inserted. No settings can be changed in this area. If you have not inserted a microSD memory card in the camera, 0 MB appears for Total size and Free size.
Operating the Camera (Android) Alarm Setting Alarm Setting This area contains various information and options with which to define the alarm settings of the camera and ProHomeIPC App. Your smartphone or tablet PC can be setup to issue an acoustic signal on detecting a movement. To do this, activate the Push Notification option in the ProHomeIPC App in the settings options provided by the smartphone or tablet PC. 1. Touch Alarm in the Alarm Setting menu.
Operating the Camera (Android) Alarm Setting Alarm Switch This option is used to define whether surveillance by the camera should be activated or not. If the surveillance function is active, a recording is made of the area under surveillance and you are alerted to an alarm situation by an acoustic alarm and Push Notification on your smart phone or tablet PC according to the settings defined. 1. Touch the Switch icon beside the Alarm Switch op tion. The Switch icon indicates it is ON. 2.
Operating the Camera (Android) Alarm Setting Motion Detection You can select from the list how sensitive the camera should react to movements in the area under surveillance. In the case of a static image, we recommend the High, setting, in the case of possibly recurrent movements (such as a pet or clouds), we recommend the Medium or Low setting in order to prevent false alarms. 1. Touch Motion Detection in the list. 2. Touch the setting required. 3. Save the settings by touching OK.
Operating the Camera (Android) Alarm Setting Receiver (Protect) Use this menu to define whether the receiver is active or not. A condition for successful activation of this function is that you have connected the receiver to your camera and registered it on your alarm system. When this function is activated, the camera receives a signal from the alarm system in the event of an alarm.
Operating the Camera (Android) Alarm Setting Preset Alarm Linkage You can use this menu to define which of the image sec tions saved should be permanently monitored (refer to Saving Image Sections as Presets)). A condition for the successful use of this function is that the Alarm Switch function is active. 1. Save at least one image section in one of the four mem ory locations available (refer to Saving Image Sections as Presets). 2. Touch Preset alarm linkage in the list. 3.
Operating the Camera (Android) Alarm Setting Alarm Recording on the SD Card You can use this option to define whether the recordings made should be saved on the microSD memory card in serted or not. A condition for the successful use of this function is that you have inserted a microSD memory card in your camera (refer to Inserting a MicroSD Memory Card). 1. Touch the Switch icon beside the Alarm recording sd card option. The Switch icon indicates it is ON. 2. Save the settings by touching OK.
Operating the Camera (Android) Alarm Setting Push Notification You can use this option to define whether the ProHomeIPC App push notifications should be sent to your smartphone or tablet PC when the camera detects movements or the alarm system connected is triggered. A condition for the successful activation of this func tion is that the transmission of push notifications has been enabled in the system settings on the smart phone or tablet PC.
Operating the Camera (Android) Time Setting Time Setting This option provides information and functions regarding the time settings used. 1. Touch Advanced in the Time Setting menu. 2. Define the respective settings as required. 3. Save the settings by touching OK. When the default settings are active, the time and date stamp displayed in the live image reflect the time and date provided by the network connected.
Other Important Information Guarantee, Service, Disposal and CE Mark Other Important Information Information on Disposal The adjacent symbol indicates that old electrical and electronic apparatus no longer required must be disposed of separate from domestic waste in accordance with legal directives. Packaging materials must be disposed of ac cording to local regulations. Guarantee Dear Customer, we are pleased that you have chosen this equipment.
Other Important Information Technical Data Technical Data Property Value Lens / Sensor Resolution Image compression 1/5" CMOS sensor (colour), 4 - 9 mm, optional: 5 x optical zoom Max. 1280 x 720 pixel H.264 Light sensitivity 0.5 lux Image refresh rate 15 fps (VGA), 30 fps (QVGA) Night vision 11 IR LEDs, range up to 10 meters Pivoting range 330° horizontal, 80° vertical Angle of vision 67° Motion detection Yes Microphone / Loudspeaker Yes / Yes MicroSD Max.
Other Important Information Troubleshooting Troubleshooting My camera is not detected within the network. My camera is detected within the network but I cannot access it. Check all the cable connections. Observe the informa tion in Section Connecting the Camera. Check the entries for the user identifier and password (security code). The default values are provided on the rear of the camera. Check the network settings. The DHCP function must be activated in the router.
Other Important Information Troubleshooting My camera does not respond at all or only very slowly to input via the ProHomeIPC App. The connection to your network is slow or faulty. Check all the cable connections. Use a shorter network cable, if necessary. Observe the information in Section Con necting the Camera. The mobile internet connection available is of different quality in different localities. Move to a different location and try again.
Olympia Business Systems Vertriebs GmbH Zum Kraftwerk 1 45527 Hattingen
