R Protect 6XXX Series Wireless Alarm System Instruction Manual 17.12.
Olympia Business Systems Vertriebs GmbH Zum Kraftwerk 1 45527 Hattingen
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Panic Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Emergency Call (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Remote Access Via Telephone . . . . . . . . . . . . . . . . . . 25 Resetting the Factory Settings (RESET) . . . . . . . . . . 26 Registering Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Deregistering Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . 27 System Extension . . . . . . . . . . . . . . . . . . .
Introduction Introduction User Information Warranty The alarm system is a passive security product and has been conceived as a deterrent. Additional measures are necessary to prevent and hinder burglary and theft. You can obtain all the necessary information on this from your local police station. Dear Customer, we are pleased that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point-of-sale.
Product Features / Scope of Delivery Product Features S S S S S S S S S S S S S S S Scope of Delivery Wireless alarm system with emergency call, panic, room screening and handsfree functions. Transmit function to activate outdoor sirens etc. Integrated telephone dialling unit with outgoing message. Up to 10 alarm call numbers and 1 emergency call number (SOS) can be stored.
Safety Information Safety Information Important Safety Information Significance of the Symbols Please observe the following safety information to ensure the wireless alarm system can be used safely and reliably: WARNING: CAUTION: NOTE: Indicates potentially dangerous situations which could lead to fatal or severe personal injury if the information is ignored. Indicates potentially dangerous situations which could lead to minor personal injury if the information is ignored.
Installation Preparing and Connecting the Base Unit Installation, Base Unit NOTE: Information on Selecting the Installation Location S S S S The base unit should be installed or positioned in a central location (e.g. in the hallway of an apartment/house) in relation to the area to be monitored in order to keep all transmission paths as short as possible. The alarm system can also be operated without a telephone connection.
Installation Positioning the Base Unit Wall Installation It is possible to setup the device in a user-friendly, inclined position on a table or desk. To do this, insert the two legs (1) supplied in the recesses for the wall installation bracket (2) on the rear of the base unit. After having found a suitable location for the base unit, you can begin with the installation. 1 WARNING: 2 NOTE: Risk of fatal injury through electric shock or gas explosion.
Operating Elements and Indicators Function Assignment to Buttons, Base Unit Operating Elements and Indicators The base unit is equipped with an SOS (emergency call) button for emer gency situations and a Panic button in the event of a direct threat. The wireless remote control unit is provided with a button which can be con figured either as an Emergency Call or Panic button (refer to "Configuring the Wireless Remote Control Unit").
Operating Elements and Indicators At Home mode: The system is armed; on burglary, the acoustic alarm signal is issued 0-9, *, # Digit keys: On pressing the # button >3 sec., a 2 sec. dialling pause is activated * In Text mode: Switch between upper and lower case # àáâÇ 0 +&@0/%*#$£O§¿¡ 1 “Tap” ? ! 1 , .
Operating Elements and Indicators Function Assignment to Buttons, Remote Control h Save icon Battery indicator Battery capacity of base unit is low.
Menu Structure Menu Structure Review Register Trigger Delay Open Sensor01 Voice Record Remote:1 Voice Record Search… Open Sensor01 Voice Record Remote:1 Voice Record Duration Delay: 0-240S Trigger Tone On Off Arming Delay Delay: 0-240S Flood & Smoke Standard Activate Remote Key Remote: SOS Remote: PANIC Entry Code OPERATING INSTRUCTIONS 1234 Giu Page 13
Menu Structure Key Tone Key Tone-On Key Tone-Off Contrast Contrast-1-5 Language Deutsch Español Nederlands Dansk Português English Français Page 14 Date/Time 01-01-2010 Alarm period Time:1-10Min 00:00 Giu OPERATING INSTRUCTIONS
Configuration Selecting the Language Configuration There is a range of languages available for selection: General Information NOTE: Before beginning to operate the base unit, de activate the key lock function. You need the 4-digit Entry Code to do this. The default, device-specific Entry Code is provided in the battery compartment of the base unit. The key lock is reactivated automatically when no buttons are pressed for a period of 10 seconds.
Configuration Setting the Date/Time 1. 2. 3. 4. 5. 6. 7. 8. 9. Enter the device-specific Entry Code. Confirm it by pressing . The menu is opened by pressing the Menu button briefly. Select the Date/Time menu option. Confirm it by pressing . Display: 01-01-2010. Use the keypad on the base unit to enter the day, month and year. Confirm it by pressing . Display: 00:00. Enter the time as hour and minute. Confirm it by pressing . The main menu reappears in the display. Press to exit from the menu. 6.
Configuration Activating the Internal Telephone Dialling Unit with OGM Function The internal telephone dialling unit is deactivated if no telephone numbers have been entered and saved. You can enter up to 10 individual telephone or mobile phone numbers of contact persons, such as relatives, friends or neighbours.
Configuration After having entered phone numbers, ensure that they are correct in re spect of the alarm calls. You can do this by triggering a silent alarm. The telephone numbers you have entered are dialled in succession in the pro grammed sequence. 1. Enter the device-specific Entry Code. Confirm it by pressing . 2. On pressing the key, Silent mode is activated. Silent mode is indicated in the display by the icon after the selected arming delay has expired. 3.
Configuration Trigger Delay Arming Delay The alarm is triggered after a delay so that if someone enters through the main door, they can disarm the alarm system before the acoustic alarm and internal telephone dialling unit are activated. You can set a trigger delay between 0 and 240 seconds. You can set an activation delay between 0 and 240 seconds. The alarm system is armed after this period has expired.
Configuration Alarm Period Key Tone On/Off The base unit is equipped with an integrated siren. The duration of the acoustic alarm can be selected between a minimum of 1 minute to a max imum of 10 minutes. The alarm period is preset to 3 minutes (an alarm period up to 3 minutes is permitted in Germany!). It is possible to switch the key tone feature for the base unit on and off: 1. Enter the device-specific Entry Code. Confirm it by pressing . 2.
Configuration Remote Control Flood and Smoke Detectors You can set-up the base unit so that flood and smoke detectors trigger an alarm when the base unit is disarmed. 1. Enter the device-specific Entry Code. Confirm it by pressing . 2. The menu is opened by pressing the Menu button briefly. 3. Select the Flood & Smoke menu option. Confirm it by pressing . 4. Use the and buttons to select Standard or Activate. 5. Confirm it by pressing . The main menu reappears in the display. 6.
Monitoring Functions Overview of Monitoring Functions Monitoring function Acoustic alarm signal Switching the Monitoring Functions On/Off Internal telephone dialling unit activated Silent mode No Yes with screening function Alarm mode Yes Yes At Home mode Yes No Disarmed mode No No Emergency call (SOS) No Yes with handsfree function Panic alarm Yes No NOTE: Before switching any functions on, inform all the other people living in the residence regard ing the location and method of ope
Monitoring Functions You can define the required type of alarm as follows using either the base unit or the remote control unit supplied: NOTE: At Home Mode NOTE: If an outdoor siren is registered on the base unit, the alarm can only be stopped by the re mote control unit after 15 seconds at the earli est. During the night, when you are asleep, you should activate At Home mode. Before doing so, check that all the doors and windows are closed.
Monitoring Functions Disarmed Mode NOTE: Emergency Call (SOS) When the system is disarmed, you can move freely within the living quarters without trigger ing any alarms. Base unit 1. Enter the device-specific Entry Code. Confirm it by pressing . Remote control 1. Press the button. You can trigger the SOS (emergency call) function by pressing the button on the base unit or the button on the remote control unit, de pending on the configuration.
Remote Access Via Telephone Remote Access Via Telephone Key The wireless alarm system can be operated by remote access using a telephone. You can use a telephone to activate or deactivate the alarm system and switch the handsfree and screening functions on. NOTE: The base unit takes your call after 8 rings. An swering machines operate according to the same principles of taking a call after a specific number of rings.
Resetting the Factory Settings (RESET) Resetting the Factory Settings (RESET) NOTE: Please note that when carrying out a RESET, all the user settings are deleted. The registra tion of the sensors is retained! After a RESET has been executed, the 4-digit Entry Code is 1-2-3-4! Proceed as follows to reset the factory settings on the wireless alarm sys tem: 1. Use a screwdriver to loosen the screw in the battery and connection socket compartment on the underside of the base unit. 2. Press the RESET button.
Registering and Deregistering Sensors / System Extention Registering Sensors Deregistering Sensors Up to 32 sensors can be registered on the wireless alarm system. 1. Enter the Entry Code. Confirm it by pressing . If you purchase optionally available sensors, such as additional remote controls, smoke detectors etc., they must be registered manually. 2. Press the button. Review appears in the display. Proceed as follows to register the sensors: 1. Enter the Entry Code. Confirm it by pressing . 2.
Changing the Batteries Remote Control Changing the Batteries If the battery charge of the sensors is low or practically empty, the following status messages appear in the display: Battery capacity low 1. bAtt Lo appears in the display. The sensor affected, e.g. Open Sen sor01, is displayed. 2. If you activate the alarm system, 5 successive, short acoustic signals are issued. NOTE: Change the batteries! Base Unit The icon in the display indicates a low battery capacity in the base unit.
Regular Maintenance and Servicing Regular Maintenance and Servicing Base Unit 1. Disconnect the base unit from the power outlet before cleaning it! 2. Clean the surface of the housing with a soft, lint-free cloth. Never use any chemicals or scouring agents.
Information on Disposal Information on Disposal The implementation of European law in national laws and direct ives obliges you to dispose of consumable goods appropriately. This serves to protect both persons and the environment. The adjacent symbol indicates that electrical and electronic apparat us and batteries no longer required must be disposed of separ ate from normal household waste. Old or unwanted devices must be disposed of at collection points provided by public waste authorities.
Technical Data Technical Data Remote Control The wireless alarm systems in the Protect 6XXX-Series operate within the frequency band specially reserved for security technology in the 868 MHz frequency range. This ensures that interference to the wireless alarm sys tem by other consumer products, such as baby monitors, is ruled out.
CE-Mark CE Mark The device fulfils the requirements stipulated in the EU Directive: S 1999/5/EC (R&TTE) The CE Mark on the device confirms conformity.
Empty Page
Empty Page 6HLWH
Empty Page
PIN Code This is your individual, preset PIN code! If you want to change this predefined PIN code, please refer to Chapter "Configuration" in this operating instruction manual. Keep this operating manual in a safe place away from the wireless alarm system! Please note that the Copyright of this operating instruction manual is by Olympia and, therefore, must not be further copied, published or sold in any form. The information contained in the operating instruction manual is only intended for personal use.
