Operation Manual

Operating Instructions
Page 5 of 18Homeplug Olympia 2000E Power
Introduction
The HomePlug 2000E Power uses the power cables already laid inside buildings to
transmit signals in order to provide a reliable network of computers and related
network equipment. Using a maximum transmission speed of 200 Mbps, the
HomePlug 2000E Power can communicate sophisticated applications, such as
internet telephony, high resolution video applications and internet, reliably and
simultaneously.
The technology implemented by the HomePlug modulates the computer data so that
it is possible to transfer it from point−to−point via the power cables. Using this
technology, two computers have a virtual network connection without the units
actually being physically connected to each other.
The HomePlug 2000E Power implements No New Wires
®
communication in every
room via any power line at a speed of up to 200 Mbps. It is equipped with three
control lamps (LEDs), a network port (Ethernet) and a Simple Connect button. The
LEDs serve to indicate the connection status and to signal problems concerning fault
location. The Ethernet port is used to connect the HomePlug 2000E Power to the
network. The Simple Connect button serves to produce a simple HomePlug network
without the need to use the software. The HomePlug 2000E Power is equipped with
a Euro plug and, thus, is suitable for any 100−240 V power socket.
Networking computers has the following advantages:
1. Shared access to centrally stored data.
2. Shared access to all the printers in the network.
3. Shared access to an internet connection.
4. Multi−user games throughout the network.
Package Contents
The package contains:
HomePlug 2000E Power
Twin Pack = 2
Easy Start Guide
Network cable (Ethernet)
Twin Pack = 2
Utility CD
Fig. 1 Package contents
If anything is missing or shows signs of damage, please contact the sales outlet
where you purchased the device immediately.