Operation Manual

Operating Instructions
Page 3 of 18Homeplug Olympia 2000E Power
Safety Information
The HomePlug 2000E Power is an electronic device and operates when connected
to the mains power supply. For reasons of your own personal safety, handle it with
the same care and attention given to all electrical equipment!
For reasons of safety, read the following regulations and instructions and observe the
information contained:
1. Unplug the HomePlug 2000E Power from the power outlet before cleaning it.
Never use liquid cleaning agents or aerosol cleaners. Only use a slightly moist
cloth.
2. Do not use the HomePlug 2000E Power near water.
3. Do not use the HomePlug 2000E Power beside or above a heating radiator or a
source of water. Never use the device as a built−in installation except where
sufficient ventilation is ensured.
4. Do not expose the HomePlug either to extreme temperatures or humid
conditions and protect it from direct sunlight and dusty conditions.
5. The HomePlug 2000E Power should only be connected to a mains power outlet
whose properties comply to those indicated on the corresponding product labels.
If there is any cause for doubt, consult your dealer or local power company.
6. The HomePlug 2000E Power may only be connected to a fused power outlet.
Ensure that the fuses and circuit breakers of all the lines conducting electricity
are designed for 100−240 V (according to the standard national power supply
grid).
7. Connect the HomePlug 2000E Power adapter to a 100−240 V power socket. Do
not use an extension cord.
8. Do not attempt convert the HomePlug 2000E Power or complete repairs to it
yourself because opening and removing covers may expose you to dangerous
voltages and other risks as well as annulling the terms of warranty. All repair and
service work must be performed by qualified service personnel.
9. Unplug the HomePlug 2000E Power from the power socket and refer to an
authorised service workshop in the case of the following:
S If liquid is spilled into the device.
S If the device comes into contact with water.
S If the device does not operate normally despite following the information in the
operating instruction manual.
S If the device shows a distinct deterioration in performance.