Operation Manual

Operating Instructions
Page 11 of 18Homeplug Olympia 2000E Power
Important Information
Network capacity
A maximum of 15 HomePlug 2000E Power units can be installed in a single−family
house.
Network security
Normally, an electricity meter forms a physical boundary, i.e. only devices connected
to a particular electric meter can be part of a network and benefit from the phase
coupling. However, we recommend setting up a private network by assigning a new
network name. It can be defined by pressing the Simple Connect button or using the
configuration software on the Utility CD. The HomePlugs use a 128 bit AES
encryption system (Advanced Encryption Standard).
NOTE: The HomePlugs operate with each other with overlapping phases. If
problems arise, call an electrician to install a so called phase coupler.
NOTE: In order to use equipment from different manufacturers together with the
HomePlugs, define the same network name and password for all the
devices. Use the configuration software to do this. If necessary, refer to the
manual supplied with the other device.
Correct use of passwords
You can improve your security substantially by following some important rules
regarding the use of passwords:
S Keep your passwords as confidential as possible.
S Never write your passwords down or keep them in notebooks, wallets or in text
files on computers.
S Do not pass on your password unnecessarily.
S Select a random password. Use strings of letters and numbers. Passwords from
words used in common language are not secure.
S Passwords should be changed as often as possible. This requires a little effort
but increases security considerably. The password should be changed even if
only there is only the slightest suspicion of a leak.