Installation Guide

Thank you for purchasing this quality product. Olympia products are rigorously tested to provide long service
under normal conditions. Prior to installation, familiarize yourself with this parts diagram. Make sure that you have
all of the illustrated parts for your Olympia product before installation.
INSTALLATION INSTRUCTIONS
Tools you will need:
• Plumbers Putty • Teon Tape
• Screwdriver • Adjustable Wrench
• Pipe Wrench • Soft Cloth
• Allen Wrench
Tub And Shower INSTALLATION:
1. Carefully shut off both hot and cold water supplies. Cover the drain with a soft cloth to prevent the
loss of any parts. If this installation is for a replacement, carefully remove the existing valve and
clean the entire mounting surface.
2a. For ½” pipe thread connection: connect water supplies to left union (hot) and right union (cold) with
Teon Tape. When tighten nut, ensure washer (H) is placed between union and valve body.
2b. For ½” sweat copper tubing connections: remove rubber and plastic parts before soldering to pre-
vent damage. Solder water supplies to left union (hot) and right union (cold) valve body inlets. When
tighten nut, ensure washer (H) is placed between union and valve body.
2c. For PEX and CPVC tubing connections: connect water supplies to left union (hot) and right union
(cold) with Teon Tape. When tighten nut, ensure washer (H) is placed between union and valve
body.
3. Insert shower ange (N) onto the shower arm (M). Install shower arm (M). Then install showerhead
(L). Apply teon tape at threaded connection.
4. Install tub spout (O,P). Place handles (A1,A2 or A3) on stem extension (D) and turn on hot and cold
water to full open for one minute to ush thoroughly. Check for leaks & diverter funcation for tub and
shower set.
5. Shut off water. Remove handles (A1,A2 or A3). Install trim anges (B) & showerhead (L). Re-install
handles (A1,A2 or A3).
Olympia Faucets, Inc. © 2014
For more care information or trouble shooting inquiries
about your Olympia product, please call:
OLYMPIA FAUCETS, INC. [phone]
Central Standard Time: 8:00am ~ 7:00pm
www.olympiafaucets.com
ITEM # DESCRIPTION
A1 OP-140009 Lever Handle
A2 OP-140013C,H,V Acrylic Handle-Cold,Hot, Diverter
(For P-124X, P-324X
A3 OP-190015C Lever Handle (For P-125X,
P-3250)
B OP-440037 Flange
C OP-440036 Sleeve
D OP-440035 Stem Extension
E OP-340006C,H Cartridge-Cold,Hot
F OP-490041 Springs & Seats
G OP-340007 Diverter Stem Unit (For P-32X0)
H OP-440050 Washer
I OP-440015 Union
J OP-440016 Nut
K OP-490011 3/32” Allen Wrench
L OP-640003 Adjustable Showerhead 2.5 GPM
M OP-640002 Shower Arm
N OP-640001 Shower Flange
O OP-640014 1/2” IPS Tub Spout (For P-32X0,P-
12X1)
P OP-640015 1/2” IPS Diverter Tub Spout (For
P-12X0)
Q OP-440017 Protective Cover
1 OP-490012C,H,V Cap-Cold,Hot, Diverter
2 OP-490025 Handle Screw
3 OP-490029 Allen Screw