Specifications Sheet

OPTIONAL ACCESSORIES
INCLUDED ACCESSORIES RECOMMENDED TAPWARE
® Registered trademark of Tasman Sinkware. Under its policy of ongoing product development Tasman Sinkware may from time to time change product specification without notice.
All dimensions given are approximate and should be checked prior to installation. See Oliveri installation instructions for installation details.
For more information call 1300 13 7465 or visit www.oliverisinks.com
SPECIFICATIONS
facebook.com/
OliveriAU
twitter.com/
OliveriAU
pinterest.com/
OliveriAU
MR501
Martini
AC14 AC02 PA113/2 MV617/6
Description
3/4 bowl inset sink with drainer
Sink Size
740W x 350H
3/4 Bowl
330W x 270H x 155D / 12L
Construction 2 piece, bowls & drainer seam welded
Material 304 grade, 18/10 polished stainless steel (0.8mm thick)
Installation Inset recommended.
Fixings Adjustable clips and sealing foam supplied
Cut Out Template 720 x 330 x 15mm radius
Min Cabinet Size 500mm
Tap holes Available 0 or 1 tap hole (specify when ordering)
Waste fittings 1 x 90mm basket waste included
Overflow Not available
Carton Size 757 x 367 x 182mm
Weight 4.0kg
Warranty Lifetime manufacturer’s warranty (refer to oliverisinks.com)
LEFT HAND BOWL SINK