Spec Sheet

ManualsBrandsOliveri ManualsSinksFlorence Single Bowl Topmount Sink With Drainer

® Registered trademark of Oliveri Solutions. Under its policy of ongoing product development Oliveri Solutions may from time to time change product speciﬁcation

without notice. All dimensions given are approximate and should be checked prior to installation. See oliveri.com.au for installation and warranty details.

For more information call 08 8348 6444 or visit oliveri.com.au

All dimensions in mm

Italian made

Speciﬁcations /

Sink size 860W x 500H mm

Bowl size Main Bowl

450W x 430H x 210D / 40.5L

Construction Moulded granite

Material 80% granite and quartz particles and 20% acrylic

Installation Topmount

Fixings Topmount clips supplied

Min cabinet size 600 mm

Tap holes Installer to complete semi-drilled tap hole for LH or RH bowl

Waste ﬁttings 1 x 90 mm basket waste included

Overﬂow Not available

Carton size 960 x 580 x 310 mm

Weight 13.2 kg

Warranty Lifetime manufacturer’s warranty (refer to oliveri.com.au)

Maintenance and

care instructions

Clean the sink regularly with warm water, a liquid detergent

and a soft cloth. Do not use abrasive powders or creams and

avoid chemically aggressive detergents. Generic stains should

be removed immediately with very hot water and a cleaning

product. For organic stains which are especially difﬁcult to

remove, it is recommended that you ﬁll the sink with a highly

diluted organic cleaner such as bleach and let stand overnight.

The next morning, rinse with warm water and a soft cloth.

Florence

FE-BL1525

Black Single Bowl Topmount Sink With Drainer

Included accessories /

AC28

Basket Waste

REVERSIBLE SINK

Your installer will drill the tap hole depending on

which side you require your sink’s bowl(s) and drainer.

Summary of content (1 pages)

PAGE 1
Italian made FE-BL1525 Black Single Bowl Topmount Sink With Drainer ® Registered trademark of Oliveri Solutions. Under its policy of ongoing product development Oliveri Solutions may from time to time change product specification without notice. All dimensions given are approximate and should be checked prior to installation. See oliveri.com.au for installation and warranty details. REVERSIBLE SINK Your installer will drill the tap hole depending on which side you require your sink’s bowl(s) and drainer.