User manual

OLIMEX© 2012 PIC32-PINGUINO-MICRO User's Manual
CHAPTER 7
HARDWARE
7. Introduction to the chapter
In this chapter are presented the connectors that can be found on the board all together with their
pinout. Proto area is shown. Jumpers functions are described. Notes and info on specific peripherals
are presented. Notes regarding the interfaces are given.
7.1 mini ICSP
The miniICSP connector provides option to reprogram the board if you do not wish to use Pinguino
IDE.
Pin # Signal Name
1 RESET
2 +3.3V
3 GND
4 PGED2
5 PGEC2
6 Not connected
7.2 UEXT
PIC32-PINGUINO-MICRO board has UEXT connector and can interface Olimex's UEXT
modules.
For more information on UEXT please visit:
Page 16 of 29