User manual

Restore procedure:
If you want to restore Olimex's original software you should program PIC18F67J60 with “<extraction
directory>\PIC-WEB 5.42 UEXT Full\TCPIP\Prebuilt\Bootloader+Demo.hex” from MPLAB IDE.
After you have load this “*.hex” file, you should open “<extraction directory>\PIC-WEB 5.42 UEXT
Full\Microchip\TCPIP Stack\Utilities\TCPIP Discoverer.jar” Click on the button “Discover Devices” and
the IP address of PIC-WEB will be discovered (for example - 192.168.0.171). Note that your LAN must have
DHCP server. In your browser type the IP of the board with the following path:
http://192.168.0.171/mpfsupload
Here is a screenshot of what you will see:
Click on the button “Browse_” to select the “*.bin” file you are about to upload. Select the image file
in directory “<extraction directory>\PIC-WEB 5.42 UEXT Full\TCPIP\Prebuilt\MPFSImg2 Prebuilt.bin”
and press 'Upload'. Sit back and relax while the upload takes place and then navigate to the home page to behold
the page just uploaded.
Now your PIC-WEB is with Olimex's original software.
Page 32 of 36