User manual

PIC-WEB Software
After downloading the necessary PIC-WEB software and executing the instructions in “README.txt”
file, you will have a working demo. Open this project “<extraction directory>\PIC-WEB 5.42 UEXT
Full\TCPIP\Demo App\PIC-WEB 5.42 Demo.mcp”
Now is time to compile! If there aren’t bad configuration the compilation must be successful, that
means that you have to get the “BUILD SUCCEEDED” message on the output window.
Note: the version of the MPLAB IDE that you are using can change the last explanation, newer version
will appear since this manual was written or you can have an old one, that’s means that the software
configuration steps can change a little but the main idea is the same. Don’t hesitate if it doesn’t work on the first
time, just keep trying isn’t complicate.
Page 30 of 36