User manual

Then you must select in MPLAB IDE – Programmer → Select Programmer → PICKit 3.
Wait while MPLAB is downloading operation system, and after Pic-Kit3 is connected – check in menu
Programmer – Settings – Power – there is option – Power target circuit from PicKit3 – this option should be
forbidden, you could not select it. Now it is safe to connect the programmer to your target board trough an ISCP
cable. The PIC-WEB should be connected to the power supply.
If you have something already compiled, you can open the “*.hex” file and then program it to the PIC-
WEB. Just importing the “*.hex” file in File → Import menu. If you don't have something already compiled, you
can use some of the “*.hex” files offered by Olimex Ltd.
After you have done everything correctly you will have ready to use “*.hex” files. You can program
with it by importing it. “File → Import...”, select path: “<extraction directory>\PIC-WEB 5.42 UEXT
Full\TCPIP\Prebuilt\PIC-WEB Demo prebuilt.hex” (you can also use the “Bootloader+Demo.hex”).
For programming the PIC just push the program button on the tools or selecting the menu Programmer
→ Program. To do this follow the steppes in the next screenshot:
On step 2 you should choose the specific hex you want to program: bootloader; bootloader + demo; only demo.
Page 27 of 36