User manual

FEATURES:
• ICSP/ICD connector for programming with PIC-MCP, PIC-MCP-USB, PIC-
PG1,PIC-PG2, PIC-PG3 or PIC-PG4 and programming and debugging with
PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY
• USB 2.0 type B connector allows board to be interfaced to PC host.
• PIC18F4550-I/P on DIL40 socket
• Quartz crystal 20Mhz
• LED connected to RD3 through jumper
• user Button connected to RB4
• Reset button
• Power plug-in jack with diode bridge can be powered with AC or DC power
supply
• 5V voltage regulator
• Extension slot on every uC pin
• Gird 100 mils
• GND bus
• Vcc bus
• Four mounting holes 3,3 mm (0,13")
• FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions 100x80 mm (3,9x3,15")
All boards produced by Olimex are ROHS compliant