User manual

POWER SUPPLY CIRCUIT
MSP430-LED8x8 BOOSTERPACK can take power from MSP-EXP430G2 via J1
connector pin 10 (VCC) and J2 connector pin 1 (GND).
The board power consumption is: about 90 mA with all peripherals running at full
speed.
JUMPER DESCRIPTION
There are no jumpers on this board.
Input/Output
LED MATRIX 8x8 51x51mm
BUZZER – connected to J1 connector pins 7 (BUZ_PIN2) and 8 (BUZ_PIN1).
CONNECTOR DESCRIPTIONS
J1
Pin # Signal Name
1 Not Connected
2 Not Connected
3 Not Connected
4 SR_SCK
5 SR_LATCH
6 Not Connected
7 BUZ_PIN2
8 BUZ_PIN1
9 A_IN
10 VCC
Page 5