User manual

BOARD LAYOUT
POWER SUPPLY CIRCUIT
MOD-ENC28J60 is typically power supplied by UEXT pin 1 and pin 2 and by EXT
pin 10 and pin 9.
RESET CIRCUIT
MOD-ENC28J60 reset circuit includes pin 6 of UEXT connector, pin 10 of U1 and R9
(10k).
CLOCK CIRCUIT
Quartz crystal 25 MHz is connected to ENC28J60 pin 23 (OSC1) and pin24 (OSC2).
JUMPER DESCRIPTION
There are no jumpers on this board.
Page 7