Datasheet

1.2 The OLinuXino family

Table of comparison

OLinuXino-MICRO OLinuXino-MINI OLinuXino-MAXI

Processor iMX233 @ 454Mhz iMX233 @ 454Mhz iMX233 @ 454Mhz

Ram [MB] 64 64 64

# USB hosts 1 3 2

100/150 Mbit

Ethernet*

No/WIFI option** No/WIFI option*** Yes/WIFI option**

GPIO connector 60pins 40pins 40pins

# Buttons 3 2 2

Reset button Yes Yes Yes

DC power supply 5V 6V-16V 6V-16V

Dimensions 3.40'' x 1.70'' 3.70'' x 2.65'' 3.70'' x 2.65''

Breadboarding Yes No No

Audio IN connector No Yes Yes

Audio OUT connector No Yes Yes

UEXT connector No Yes Yes

* 100Mbit Ethernet for the wired network of OLinuXino-MAXI. 150Mbit for the WIFI following

811.02n standard.

** All three boards have the option to work with MOD-WIFI_RTL8188, which is USB WIFI

modem with RTL8188CU chip and can be purchased separately. MOD-WIFI_RTL8188 can be

connected to any of the OLinuXino boards via the USB.

*** OLinuXino-MINI has additional option of having RTL8188CU hardware mounted! If you wish

RTL8188CU embedded in the device you should purchase OLinuXino-MINI-WIFI. Choosing the

embedded WIFI option will leave your USB-HOSTs available for use.

1.2 Target market and purpose of the board

The boards from the OLinuXino family are ready to use, easy to setup and are suitable for

embedded programming enthusiasts, Linux hobbyists, gadget fans and also professionals (since its

low cost makes it very good solution for application orientated embedded systems). The main usage

of the board is software embedded development without the urge of understanding perfectly the

hardware.

Page 6 of 60