Datasheet

OLIMEX© 2012 A13-OLinuXino user's manual
6.9 Battery connector
When using the battery connector keep in mind that it is an energy solution that wouldn't be able to
power the board and all the peripherals. The voltage of a 3.7V LIPO battery would be enough to
power the processor and the memory but won't be enough to power external touchscreen LCD.
Pin # Signal Name
1 VBAT
2 GND
The pins are also print at the bottom of the board under the connector.
6.7 VGA video connector
The female DB15 connector is used for video output on a monitor.
At the moment the maximum achieved resolution is 800x600 due
to limited maximum frequency and the lack of integrated video
controller in the chip.
VGA connector
GPIO Pin# Signal Name GPIO Pin# Signal Name
1 VGA_R 2 VGA_G
3 VGA_B 4 Not Connected
5 GND 6 GND
7 GND 8 GND
9 GND 10 GND
11 Not Connected 12 Not Connected
13 VGA_HSYNC 14 VGA_VSYNC
15 Not Connected 16 Not Connected
Page 27 of 37