Data Sheet
M3XS-
UT
JAVELOT
Extended-range variable-output dual-switch LED ashlight
LENS
Tough ultra-clear tempering glass with
anti-reective coating
LIGHT SOURCE
1 x Cree XP-L High Intensity LED
DIMENSIONS
Length: 8.3 in / 211mm
Bezel Diameter: 2.48 in / 63mm (head);
0.98 in / 25mm (body)
Weight: 9.0 oz / 255 g (excluding batteries)
BODY MATERIAL
Aircraft-grade aluminum body with anti-scratch
type III hard anodizing
BATTERY SOURCE
3 or 4 x CR123A
2 x 18650
olightworld.com
All performance claims to ANSI/NEMA FL1-2009 Standard. Made in China.
© Olight 5/7/15
WARRANTY
Olight’s 5 Year warranty.
Visit olightworld.com/warranty
ACCESSORIES
• Spare O-rings x 2
• Holster
• Extension Tube
• Battery Magazine
WATERPROOF
IPX8
DROP TEST COMPLIANCE
FEATURES
• Cree XP-L High Intensity LED, color temperature:4000K~4500K
• Light output ranges from 3 Lumens to 1200 Lumens, Maximum beam distance up to 1000 meters, and a maximum
Run Time of 360 hours.
• 3 output modes, plus a moonlight and strobe mode. When the light is on burst mode, the brightness level at 1200lm
(5 minutes) ramps down by 60% of the initial light output (55 minutes). 600lm/1.5hrs, 80lm/12hrs, moonlight 3lm/
360hrs, 10Hz strobe mode
• The light is powered by 3 x CR123A Lithium batteries. When the light is assembled with the extension tube, it can be
powered by 4 x CR123A or 2 x 18650 batteries (with protection board).
• A brand-new conductive stretch tail cap keeps the light energized even when the tail cap is loosened accidently.
• The tail switch diameter is 18mm. The tail switch has a momentary ON-OFF functionality, supporting high output and
strobe mode at the same time. The light brightness level and strobe mode can be activated through the side switch.
• 99% light transmittance rate through tempered glass, with two-sided anti-reective coating.
• Built in thermal management safety program that limits the high output to 5 minutes and then gradually ramps down
high output by 60% after 3 minutes of constant on
• Reverse polarity protection to prevent improper battery installation
• Side switch featuring a battery power indicator glows red and blinks when the power runs low. When the battery power
indicator is constantly on, the battery will run out of power and will shut the light off
• Able to place upside down on a at surface
• IPX8 water-proof capability
1 m
2 m
4
4
4
4
FL1 STANDARD MODE 1 MODE 2 MODE 3 MODE 4
OUTPUT
1200
LUMENS
600
LUMENS
80
LUMENS
3
LUMENS
5+55(60%)
MIN
1.5 HRS 12 HRS 360 HRS
1,000 M
250,000 CD
m
INCLUDE TURBO MODE: 10 Hz / 1200 LUMENS