Installation Guide

ManualsBrandsOLG ManualsAndooModulus Meeting Table 1050mm New Oak Round Worktop with Fixed Base

1

2

3

4

5

6

7

8

9

Table Of Contents

INSTALLATION GUIDE

myolgoffice.com

Modulus Single Post Pedestal Table

01

03 04

02

Place the feet tube on top of each collar, and the upper wrist on top of the feet

tubes. Fully tighten the M10x30mm bolts through the upper wrists, and M10x110

bolt, spring washer and ﬂat washer through the collars.

Slide 2 large feet into the collar, place the 150° gasket on top and fully tighten the 2

M8x16mm bolts into the collar. (Repeat with all collars).

Place each assembled leg set together using the rail, and fully tighten the

M8x80mm bolts through the bracket into the rail.

Screw all glides into the base of the large feet, leaving the glides one turn from tight

(then they can be adjusted easily if the ﬂoor is uneven).