User's Manual

MAINTENANCE INSTRUCTIONS
www.olgoffice.com
Axis/ Anvil Desking
ANNUAL CHECK
Once every 12 months make sure all the mounting bolts on the
underside of the frame & screen brackets are tight.
TOP CARE
Axis/Anvil are supplied standard with melamine tops. Clean tops
regularly by wiping them down with a damp cloth and a general
purpose cleaner/detergent. For best results use streak free glass
cleaner.
Stain and Mark Removal
• Stubborn marks or stains – apply Handy Andy or diluted
Janola (1 part to 3 parts water), then wipe down with a warm
damp cloth.
• Smearing, finger marks, marking from cold or hot dishes,
stickiness – apply 1 or 2 applications of acetone (available at
pharmacies) and wipe over with dry cloth.
• Felt pen or dry marker - use methylated spirits or acetone
• Paint – use acetone or thinners (from a paint shop)
• Glue – contact type – use Ados Solvent N (from a paint shop)
Follow on with streak free glass cleaner to remove any residues.
FRAME CARE
Keep the plastic, glass & metal components of your table clean by
wiping them down with a damp cloth and a general purpose cleaner/
detergent. For best results use streak free glass cleaner.
SCREENS CARE
Keep the plastic, glass & metal components of your table clean by
wiping them down with a damp cloth and a general purpose cleaner/
detergent. For best results use streak free glass cleaner. The fabric is
best to be gently cleaned with a vacuum cleaner annually.