Owners Manual EN-1BS5-1BS5D-C1 202012

User Manual LR-1BS35
OMEN-1BS35-202012 2
4. Installation and operation
4.1. Mechanical interface
LR-1BS lidar can be installed in two ways: back-mounted and bottom-mounted.
 4.1.1 Back installation
There are two M3 screw holes (hole depth is 3mm) at the back of the main body for
installation.
Figure 1: Back mounting interface of LR-1BS
 4.1.2 Bottom installation
There are two M3 screw holes (hole depth is 3mm) at the bottom of the main body for
installation.
Figure 2: Bottom mounting interface of LR-1BS