OMEN-1BS2- 202012

User ManualLR-1BS2
OMEN-1BS2-202012
16
Appendix D Firmware Upgrade
This appendix will explain how to use LiDARUpgrade2D to upgrade the firmware
version of the LR-1BS series LiDAR.
Figure 14 Icon
D.1 Software features
For 2D LiDAR LR-1BS series firmware upgrade
D.2 Surroundings for software
- Windows 7,8,10
- .Net framework 4.5.2
D.3 Software operation
-1. Connect the LiDAR correctly. Check whether the LiDAR communication is normal.
-2. Click the File Information box or drag the firmware file in. The relevant information of the
corresponding firmware is prompted after the firmware file is correctly loaded .
Figure 15 Interface of software upgrade
-3. Clicking "Upgrade" , restart the LiDAR power, the file will be downloaded to the LiDAR
automatically.
-4. Check the "Continuous mode", after the upgrade, it will automatically wait for the next
upgrade, which can be used to upgrade LiDAR firmware in batches