Use and Care Manual

Page | 8
Popcorn Cart Assembly (cont.)
STEP 9:
Note: Before assembling the front and back panels, determine
which side you want the cabinet door facing.
Insert the CABINET FRONT (H) and CABINET BACK (I). Secure both
panels to the SUPPORT STANDS (C) with SCREWS (V), as shown.
Tighten screws with screwdriver.
STEP 10:
Remove the pre-assembled screws from the PUSH HANDLE (L).
Attach one of the WORKING PLATFORM BRACKETS (K) to one
end of the handle.
Insert the WORKING PLATFORM (J) to the same bracket using
the pre-installed posts. Insert the screw and tighten.
Repeat steps above to attach the remaining bracket on the other
side.