Use and Care Manual

Popcorn Cart Assembly (cont.)
Page | 8
STEP 9:
Note: Before assembling the front and
back panels, determine which side you
want the cabinet door facing.
Insert the CABINET FRONT (H) and
CABINET BACK (I). Secure both panels to
the SUPPORT STANDS (C) with SCREWS
(V), as shown. Tighten screws with
screwdriver.
STEP 10:
Remove the pre‐assembled screws from
the PUSH HANDLE (L). Attach one of
the WORKING PLATFORM BRACKETS
(K) to one end of the handle.
Insert the WORKING PLATFORM (J) to
the same bracket using the pre‐installed
posts. Insert the screw and tighten.
Repeat steps above to attach the
remaining bracket on the other side.