Installation Guide

How to Create Wedge Pieces
Option 1. Use the tail to create a wedge piece for ends of curved
walls or for one of the edger options.
1. Place the block on the grass or soft surface.
2. With a metal chisel and framing hammer, lightly tap along
the neck.
3. Flip the block over and continue lightly tapping, creating a
score line all the way around the four sides of the block.
4. Repeat process with solid force as needed until the block
splits in two.
19
Head
Tail
Neck splitting
line
Tail
Head
Neck splitting
line
Option 2. Use L-shaped pieces (see page 18) and split
at the neck to create wedge pieces.