Kaos 60 manual
Page 24 www.oldschoolmodels.com Construction Manual
Warranty Information
Old School Model Works guarantees this kit to be free from
defects in both material and workmanship at the date of purchase.
This warranty does not cover any parts damage by use or
modification. In no case shall Old School Model Works’ liability
exceed the original cost of the purchased kit. Further, Old School
Model Works reserves the right to change or modify this warranty
without notice.
In that Old School Model Works has no control over the final
assembly or material used for the final assembly, no liability shall be
assumed nor accepted for any damage of the final user-assembled
product. By the act of using the product, the user accepts all
resulting liability.
Limit of Liability
In the use of this product, our only obligation shall be to replace
such quantity of the product proven to be defective. The user shall
determine the suitability of the product for his or her intended use
and shall assume all risk and liability in connection therewith.
If the buyer is not prepared to accept the
liability associated with the use of this
product, the buyer is advised to return this
kit immediately in new and un-opened
condition.
For more information on all of our other products, as well as the latest news from Old School Model Works:
Please check out out website: www.oldschoolmodels.com
You can reach us on Facebook: www.facebook.com/oldschoolmodelworks
Instagram: www.instagram.com/oldschoolmodelworks/
Twitter: www.twitter.com/oldschoolmodels
See photos of our kits and customer builds on Flickr: https://www.flickr.com/photos/oldschoolmodelworks/
nStep 91 - Fuselage Assembly (a followup)
We've never had a problem with the fuselage sides, the way it's
described to assemble them - nor has any customer ever reported
an issue.
However, you can chose to
strengthen the end-joints
of the fuselage sheeting by
adding some 1/16” scrap
utilizing face-grain to face-
grain joints over the end-
grain joints as shown here.
This does not interfere with
any formers.
If you do decide to add these scrap pieces, make sure you add them
so they face the inside of the fuselage (making a left and a right side).
APPENDIX B