Installation Guide

pg. 1

Begin by positioning Old Mill Panel on the bottom corner

of your wall. Level the panel using a 4 foot level (pic 1).

Once level, attach the panel with the Old Mill washers and

exterior grade screws (pic 2). Screws should penetrate into

the wall studs at least 1 inch.

(pic 1)

(pic 2)

Correct

Incorrect

Wall

Thin Brick

Cut

Floor

When installing brick that is

ground level, you must remove

the bottom row of foam panel

(about 1.5 in.). This ensures that

the bottom row will be a full brick.

*Note: THIS IS ONLY FOR THE

BOTTOM ROW OF PANELS.

Panel Application

Layout Pattern

Studs Studs Studs

8 inches