Safety data sheet

Properties SI Units ASTM resp. P2H/AT
ISO Standards
Tensile Stress
N/mm
2
ASTM D 638 44
Tensile Strain % ASTM D 638 2.1
Flexural Stress
N/mm
2
ASTM D 790 70
Tensile Modulus
N/mm
2
ASTM D 638 2,600
Flexural Modulus
N/mm
2
ASTM D 790 2,500
Izod/RT, notched J/m ASTM D 256 160
Izod/-40 °C, notched J/m ASTM D 256 50
Hardness HK
N/mm
2
ISO 2039 115
Vicat/B 120 °C ASTM D 1525 95
HDT/A °C ASTM D 648 89
HDT/B °C ASTM D 648 94
MFI (220 °C/10 kg) g/10 min ASTM D 1238 37
Spiral-flow ( 2 mm, 240 °C) mm 620
Density
g/cm
3
ASTM D 792 1.04
US Units
Tensile Stress
lb/in
2
ASTM D 638 6,400
Tensile Strain % ASTM D 638 2.1
Flexural Stress
lb/in
2
ASTM D 790 10,100
Tensile Modulus
lb/in
2
ASTM D 638 380,000
Flexural Modulus
lb/in
2
ASTM D 790 360,000
Izod/RT, notched ft x ib/in ASTM D 256 3.0
Izod/-40 °C, notched ft x ib/in ASTM D 256 0.9
Hardness HK
lb/in
2
ISO 2039 16,700
Vicat/B 120 °F ASTM D 1525 2,03
HDT/A °F ASTM D 648 192
HDT/B °F ASTM D 648 201
MFI (220 °C/10 kg) g/10 min ASTM D 1238 37
Spiral-flow ( 2 mm, 240 °C) in 24
Density
lb/in
3
ASTM D 792 0.0375
RT=room temperature
*) All values are guide data and may vary to higher or lower depending on colour or production lot.
**) Richtwerte sind keine Mindestwerte, sondern charakteristische Daten, die je nach Einfärbung und Produktionscharge nach oben
oder unten schwanken können.
ASTM Guide Data* (ASTM-Richtwerte**) - Novodur P2H/AT