Printer Developer's Guide
Table Of Contents
- Contents
- 1. Setting Up the Printer
- 1.1. Select a Location
- 1.2 Where to install your printer
- 1.3 Unpacking
- 1.4 Installing the Printer
- 1.5 Installing the Paper
- 2. Using the Printer
- 3. Maintenance
- 4. Troubleshooting and Repair
- 5. Specifications
- 5.1 Introduction
- 5.2 General Specifications
- 5.3 Communication Interface Specifications
- 5.4 Physical Characteristics
- 5.5 Logical Characteristics
- 5.6 Printer Performance
- 5.7 Media Specifications
- 5.8 Paper Feed Specifications
- 5.9 MICR Specifications (Only with MICR type)
- 5.10 Auto Cutter Specifications
- 5.11 Ribbon Specifications
- 5.12 Reliability
- 6. Command Description
- 7. Using the Unitool Printer Driver
- 1. Setting Up the Printer
90
OKIPOS 425D
|
5.7.5.3.9 Wrinkle, Pleat and Swell
Use paper, which has been folded zigzag on horizontal perforated lines, free of wrinkles and pleats.
Newly unpacked paper often has wrinkles or pleats on the first and last pages. Please eliminate pages having wrinkles and
pleats before printing.
Do not utilize paper whose folding position inflates as illustrated in the fig below, because it may cause malfunction in paper
feed.
OP425_28.eps and OP425_29.eps
1 Wrinkle
2 Pleat
3 Rounded ends
1
2
3