Printer Developer's Guide
Table Of Contents
- Contents
- 1. Setting Up the Printer
- 1.1. Select a Location
- 1.2 Where to install your printer
- 1.3 Unpacking
- 1.4 Installing the Printer
- 1.5 Installing the Paper
- 2. Using the Printer
- 3. Maintenance
- 4. Troubleshooting and Repair
- 5. Specifications
- 5.1 Introduction
- 5.2 General Specifications
- 5.3 Communication Interface Specifications
- 5.4 Physical Characteristics
- 5.5 Logical Characteristics
- 5.6 Printer Performance
- 5.7 Media Specifications
- 5.8 Paper Feed Specifications
- 5.9 MICR Specifications (Only with MICR type)
- 5.10 Auto Cutter Specifications
- 5.11 Ribbon Specifications
- 5.12 Reliability
- 6. Command Description
- 7. Using the Unitool Printer Driver
- 1. Setting Up the Printer
|
Developer’s Guide: English 81
5.7.5.2.2 Paper Quality
Paper of the following quality may be used.
A25049.doc
Type Paper Quality
Single-part paper High quality paper
1 Paper smoothness must be 90 ~ 7 sec. for Beek and 75 ~ 300 sec. for Sheffield.
2 If you use paper other than that specified here, test it to verify that it prints without problems.
5.7.5.2.3 Paper Weight
The weight of paper usable for printing .
A25050.doc
Type Paper Quality Weight Max.
Copies
Total Paper Thickness
Single-part paper High quality paper 52~81g/m
2
(14~21 lb.) ——
Note 1 The standard paper weight must be 57g/m
2
(15 lb).