Printer Developer's Guide
Table Of Contents
- Contents
- 1. Setting Up the Printer
- 1.1. Select a Location
- 1.2 Where to install your printer
- 1.3 Unpacking
- 1.4 Installing the Printer
- 1.5 Installing the Paper
- 2. Using the Printer
- 3. Maintenance
- 4. Troubleshooting and Repair
- 5. Specifications
- 5.1 Introduction
- 5.2 General Specifications
- 5.3 Communication Interface Specifications
- 5.4 Physical Characteristics
- 5.5 Logical Characteristics
- 5.6 Printer Performance
- 5.7 Media Specifications
- 5.8 Paper Feed Specifications
- 5.9 MICR Specifications (Only with MICR type)
- 5.10 Auto Cutter Specifications
- 5.11 Ribbon Specifications
- 5.12 Reliability
- 6. Command Description
- 7. Using the Unitool Printer Driver
- 1. Setting Up the Printer
|
Developer’s Guide: English 123
7.1.1 Using Registered Paper Icons
1 Paper width is 190.5 mm (7.5") or more and up to 215.9 mm (8.5") inclusive.
O425_108.jpg
1 Printing area
2 Left Margin 27.94mm (1.1 inch)
3 Right Margin 27.94mm (1.1 inch)
4 Printable Maximum Width 160.02mm (6.3 inch)
5 Slip Tray Left Side
6 Paper Guide
7 Slip Tray Right Side
8 Left Margin 2.54mm (0.1 inch)
9 Paper Width = 215.9 mm (8.5")
10 190.5 mm (7.5") < Paper Width < 215.9 mm (8.5")
11 Paper Width = 190.5 mm (7.5")