English Warranty, Regulatory Information, and Specifications
Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Okidata assumes no responsibility for the results of errors or omissions beyond its control. Okidata also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this document will not affect the applicability of the information in it.
Overview Contents Year 2000 Compliance ................................................... 4 Energy Star ..................................................................... 4 Limited Warranty .................................................... 5 Limited Warranty—United States and Canada .............. 5 Limited Warranty—Latin America ................................. 7 Okidata Depot Service Centers ............................. 8 Authorized Service Providers .........................................
Year 2000 Compliance All products currently sold by Okidata are Year 2000 Compliant. Each product contains information technology that accurately processes date and time data between the years 1999 and 2000, and carries no issue for the September 9, 1999 (9999) programming concern. These products, when used in combination with products purchased from other manufacturers, whose products properly exchange data and time information, will accurately process the date and time.
Limited Warranty Overview Limited Warranty—United States and Canada Okidata, division of Oki America, Inc. (Okidata) warrants this printer to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. This Limited Warranty extends to the original purchaser only.
To make request or claim for service under this Limited Warranty, contact your Okidata Authorized Dealer, authorized third-party service provider, or Okidata. Okidata will attempt to fix the problem over the telephone prior to scheduling an on-site visit. It will be the responsibility of the owner to install any warranty replacement consumable (drum or toner) or other end user replaceable item as supplied by Okidata.
Limited Warranty—Latin America Okidata, division of Oki America, Inc. (Okidata) warrants this printer to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. This Limited Warranty does not extend to network setup, application conflicts, or consumable items including, but not limited to, image drum cartridges, toner cartridges, fuses, etc. Consumables are covered separately under individual consumable warranties.
Okidata Depot Overview Service Centers United States Okidata 2020 Bishops Gate Blvd. Mt. Laurel, NJ 08054 Phone: 800-654-3282 Fax: 609-222-5247 (U.S./Canada) 609-222-5260 (Latin America) Canada Okidata 2735 Matheson Blvd. East, Unit 1 Mississauga, Ontario Canada L4W 4M8 Phone: 800-654-3282 Fax: 905-238-4427 E-8 | OKIPAGE 18/24DX Argentina Megatech Lavalle 1524 1048 Buenos Aires, Argentina Phone/Fax:(541) 371-4123 [Touch-Tone required] Brazil Oki Data do Brasil, Ltda. Av.
Colombia Impact Calle 93 Bis No 19-50 Ofic 103-105 Bogota, Colombia Phone: 571-616-1385 Fax: 571-616-1386 Mexico Oki Data de Mexico, S.A. de C.V. Av. Insurgentes 1700 – 7 Piso Col. Florida 01030 Phone: (525) 661-6860 Fax: (525) 661-5861 Peru Teknos Comunicaciones Los Sauces 325 San Isidro, Lima 27, Peru Phone: 511-222-1818 Fax: 511-221-5404 Venezuela Intercal Servicios C.A.
Important OverviewSafety Information Your Okidata printer has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the printer. • Carefully read the provided setup and operating instructions. • Save all provided documentation for future reference. • Read and follow all warning and instruction labels on the printer itself. • Unplug the printer before you clean it.
• If you are using an extension cord or power strip with the printer, make sure that the total of the amperes required by all the equipment on the extension is less than the extension’s rating. The total ratings of all equipment plugged into the outlet should not exceed 15 amperes. • Do not poke anything into the ventilation slots of the printer. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire.
Regulatory Overview Information Federal Communications Commission Radio Frequency Interference Statement for 120-Volt Models WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Federal Communications Commission Radio Frequency Interference Statement for 230/240Volt Models WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment.
Federal Communications Commission Declaration of Conformity for 120 Volt Models Federal Communications Commission Declaration of Conformity for 120 Volt Models 1. Product Identification OKIPAGE 18, model N22002A 2. Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3.
Environmental Specifications Overview For additional specifications (including General, Physical, Interface, Print Media, Fonts, and Commands) refer to the Handbook.
Material Safety Data Overview Sheet Type 7 Toner, P/N 40468801 MSDS # 58328701 For more information, contact Okidata at: 2000 Bishops Gate Boulevard Mount Laurel, NJ 08054-4620 Emergency Information Call 1-800-654-3282 (1-800-OKIDATA) Emergency First Aid Procedures Toner swallowed (ingested) Dilute by giving two glasses of water and induce vomiting by administering Syrup of Ipecac (follow manufacturer’s instructions). Seek medical attention.
Hazardous Ingredients Styrene-Butyl Acrylate Copolymer (91% by weight) CAS# 25767-47-9 OSHA TWA 15 mg/m3 for total dust ACGIH TLV 10 mg/m3 for total dust Carbon Black (5-7% by weight) CAS# 1333-86-4 OSHA TWA 3.5 mg/m3 ACGIH TLV 3.5 mg/m3 Physical Data Melting Point: 110°C (230°F) Boiling Point: Not applicable Vapor Pressure: Not applicable Vapor Density (Air=1): Not applicable Evaporation Rate (Butyl Acetate=1): Not applicable Specific Gravity (H2O=1): 1.
Fire and Explosion Hazard Data Flash Point (Method Used): Not applicable Flammable Limits Lower Explosive Limit: Not applicable Upper Explosive Limit: Not applicable Extinguishing Media: Water, CO2, Dry Chemical, or Foam Special Fire Fighting Procedures: Do not use methods that may create a dust cloud, such as high-pressure water and/or steam Unusual Fire and Explosion Hazards • Organic components decompose at 200-455°C (392851°F). • Material may explosively combust when finely suspended in air.
Reactivity Data Stability: Stable Polymerization: Will not occur. Hazardous Decomposition Products: Thermal decomposition may result in release of oxides of carbon and nitrogen. Temperature: Do not expose to temperatures above 200°C (392°F). Incompatibility: Avoid exposure to strong oxidizers. Spill Cleanup and Disposal Spill Cleanup Small Spills 1 Remove sources of ignition. 2 Clean up spill with wet cloth. Large Spills 1 Remove sources of ignition.
Safe Handling and Use Respiratory Protection: Not normally required. For large spills, use NIOSH-approved full face-piece respirator with HEPA cartridge during cleanup. Protective Gloves and/or Eye Protection: Not normally required. For large spills, use rubber gloves and chemical worker’s goggles during cleanup. Ventilation: Outside of normal ventilation, not normally required.
