Warranty and Regulatory Information
Every effort has been made to ensure that the information in this document is complete, accurate, and up-todate. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by Oki Data.
Contents Overview Year 2000 Compliance ............................................ 4 ENERGY STAR ............................................................ 4 Limited Warranty: U.S. & Canada .............................. 5 Overnight Exchange: U.S. & Canada ........................ 7 Limited Warranty: Latin America ............................ 10 Oki Data Service Centers ........................................ 11 Specifications ..........................................................
Year 2000 Compliance ENERGY STAR® The OKIOFFICE 87 is Year 2000 Compliant. It contains information technology that accurately processes date and time data between the years 1999 and 2000, and carries no issue for the September 9, 1999 (9999) programming concern. These products, when used in combination with products purchased from other manufacturers, whose products properly exchange data and time information, will accurately process the date and time.
Limited Warranty: U.S. & Canada Overview Oki Data Americas, Inc. (Oki Data) warrants this OKIOFFICE 87 to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. Oki Data will repair (or at its option, replace) at no charge, any defective component(s) of the OKIOFFICE 87 for one (1) year from the date of purchase except for the printhead (LED imaging array), which is warranted for a period of five (5) years from date of purchase.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Overnight OverviewExchange: U.S. & Canada Note: Available in the United States and Canada. If you choose to use our Overnight Exchange service, call 1-800-OKI-DATA (1-800-654-3282): our trained personnel will try to solve your problem over the phone. If they determine that your OKIOFFICE 87 hardware is defective, an exchange unit will be shipped to you via air express. Have your credit card available, as our representative will be asking for this information.
Overnight Exchange of the OKIOFFICE 87 for a printhead failure is limited to one year from date of purchase. For the remaining printhead warranty period, replacement will be at an authorized service center or authorized third party service organization. Call 1-800-OKI-DATA (1-800-654-3282) for authorized service locations using our depot repair program.
4 We will ship a replacement OKIOFFICE 87 up to midnight ET and you should receive it the next business day—or Saturday if requested on Friday orders—and no later then two business days. The replacement will be a repaired/reconditioned “as new” machine and will require replacement of consumables—image drum and toner cartridge— from the original unit. 5 Return the original unit—reuse the packing material from the exchange unit.
Limited Warranty: Latin America Overview Oki Data warrants this multifunction printer (hereinafter Product) to be free in defect in material and workmanship and will remedy any such defect according to the terms of this Limited Warranty. This Limited Warranty does not extend to consumable items, including but not limited to toner cartridges, fuses, etc.
Oki Data Service Centers Overview For the most up-to-date listing of Oki Data Service Centers: • Consult our web site at www.okidata.com • In the U.S. and Canada, call 1-800-OKI-DATA (1-800-654-3282) • In Latin America, contact the Latin America Service Coordinator at Oki Data's Corporate Headquarters at 856-222-7496 (Spanish only) United States Oki Data Americas, Inc. 2020 Bishops Gate Blvd. Mt. Laurel, NJ 08054 Tel: 1-800-654-3282 Fax: 1-856-222-5247 Mexico Oki Data de Mexico, S.A. de C.V.
Specifications Overview For additional specifications, see the on-line User’s Guide.
Safety Information Overview Installation Hints • Install your OKIOFFICE 87 MFP in a dust-free location away from direct sunlight. • Do not plug your MFP into a power source shared by equipment which produces electrical noise (i.e., air conditioners, etc.). • Leave electronic adjustments to authorized service personnel. • The LINE terminal connects your fax machine to a standard telephone line.
• This unit is not intended to be used in parallel with any other telephone devices. • If anything happens that indicates that the MFP is not working properly or has been damaged, unplug it immediately and follow the instructions in the “Service and Support” section of your Setup Guide for having your MFP serviced. These are some of the things to look for: - The power cord or plug is frayed or damaged. - Liquid has been spilled into the printer, or it has been exposed to water.
Regulatory Overview Information Federal Communications Commission (FCC) Requirements for End Users This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely. 1 This equipment complies with Part 68 of FCC rules.
5 The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service. 6 If trouble is experienced with this equipment, please contact the following for repair and/or warranty information: Oki Data Americas, Inc. 2020 Bishops Gate Blvd Mount Laurel, N.J.
FCC Radio Frequency Interference Statements 120-Volt Models This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada (IC) Requirements for End Users The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
IC Radio Interference Statements 120-Volt Models This OKI apparatus complies with Class B limits for radio interference as specified in the Industry Canada Radio Interference Regulations. 230/240-Volt Models This OKI apparatus complies with the Class A limits for radio interference as specified in the Industry Canada Radio Interference Regulations.
Material Safety Data Sheet Overview OKIOFFICE 87 Toner (Type 6), P/N 52111701, MSDS #58331801 For more information, contact Oki Data at: 2000 Bishops Gate Boulevard Mount Laurel, NJ 08054-4620 Emergency Information: call 1-800-OKI-DATA (1-800-654-3282) Emergency First Aid Procedures Toner swallowed (ingested) Dilute by giving two glasses of water and induce vomiting by administering Syrup of Ipecac (follow manufacturer’s instructions). Seek medical attention.
Hazardous Ingredients Physical Data Styrene-Butyl Acrylate Copolymer (91% by weight) CAS# 25767-47-9 OSHA TWA 15 mg/m3 for total dust ACGIH TLV 10 mg/m3 for total dust Melting Point: 110°C (230°F) Boiling Point: Not applicable Vapor Pressure: Not applicable Vapor Density (Air=1): Not applicable Evaporation Rate (Butyl Acetate=1): Not applicable Specific Gravity (H2O=1): 1.
Fire and Explosion Hazard Data Flash Point (Method Used): Not applicable Flammable Limits Lower Explosive Limit: Not applicable Upper Explosive Limit: Not applicable Extinguishing Media: Water, CO2, Dry Chemical, or Foam Special Fire Fighting Procedures: Do not use methods that may create a dust cloud, such as high pressure water and/or steam Unusual Fire and Explosion Hazards: – Organic components decompose at 200-455°C (392851°F). – Material may explosively combust when finely suspended in air.
Reactivity Data Spill Cleanup and Disposal Stability: Stable Polymerization: Will not occur. Hazardous Decomposition Products: Thermal decomposition may result in release of oxides of carbon and nitrogen. Temperature: Do not expose to temperatures above 200°C (392°F). Incompatibility: Avoid exposure to strong oxidizers. Spill Cleanup Small Spills 1 Remove sources of ignition. 2 Clean up spill with wet cloth. Large Spills 1 Remove sources of ignition.
Safe Handling and Use Respiratory Protection: Not normally required. For large spills, use NIOSH-approved full face-piece respirator with HEPA cartridge during cleanup. Protective Gloves and/or Eye Protection: Not normally required. For large spills, use rubber gloves and chemical worker’s goggles during cleanup. Ventilation: Outside of normal ventilation, not normally required.
