Extra Information

- 114 -
Network Setting Items
4
4. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
SNMP - - ENABLE Set whether to access the
printer using the SNMP
protocol. Normally, set to
[ENABLE].
DISABLE
POP - - Disable
Species whether to use
POP3.
POP - - 110
Species the port number for
POP3.
SMTP - - ENABLE Set whether to use SMTP
sending.
DISABLE
SMTP - - 1 Specify a port number for the
SMTP protocol.
-
25
-
65535
SNTP - - ENABLE Set whether to use the SNTP
protocol.
DISABLE
Local Ports - - ENABLE Set whether to use a unique
protocol.
DISABLE
NetBIOS over TCP - - ENABLE Set whether to use the
NetBIOS over TCP protocol.
DISABLE
Network Password Change
Password
Change
Password
(last six digits of MAC
address)
Change the network
administrator’s password,
using up to 15 alphanumeric
characters. The password is
case sensitive. If you forget
the password you specied, the
password cannot be changed.
 IP Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
IP Filtering - - ENABLE Set whether to use IP ltering,
the function to restrict
access by IP address. This
function requires thorough
knowledge of IP addresses.
Normally, select [DISABLE].
Set the items below properly
when selecting [ENABLE];
otherwise, no access using
TCP/IP is allowed.
DISABLE