Operation Manual

SETTING UP YOUR PRINTER > 25

SERIAL CONNECTION

The Serial Interface Board is an option on this printer and is supplied

with installation and setup instructions. Once this board has been

installed, the serial interface settings will appear in the printer menu

and may need to be adjusted to match your PC.

1. Switch both the computer and the printer OFF.

2. Plug the cable into the serial ports of both your PC and printer

and tighten the thumbscrews (1).

The cable should comply with the RS232C Serial Interface

Specification and have a maximum length of 15 metres (49ft).

3. Turn the printer and computer back ON.

CAUTION!

Make sure the printer and computer are both turned OFF.