Operation Manual

Configuring your machine.... > 36
Print menu
ITEM CHOICE DESCRIPTION
Copies 1-999 Enter the number of copies of a document
to be printed from 1 to 999.
Duplex ON/OFF Turns the duplex (2-sided) printing
function on or off if this feature is
installed.
Paper Feed TRAY1
TRAY 2
MP TRAY
Selects the default tray for paper feed,
Tray 1 (upper), Tray 2 (lower, if installed)
or MP Tray (multi purpose tray).
Auto Tray Switch ON/OFF If two trays contain identical paper, the
MFP can switch to an alternative source
when the current tray runs out in the
middle of a print job.
Tray Sequence DOWN
UP
PAPER FEED
TRAY
Determines tray sequence order when
automatically switching.
MP Tray Usage DO NOT USE
WHEN
MISMATCH
If a document to be printed demands a
paper size not installed in the selected
tray, the MFP can automatically feed from
the multi purpose tray instead. If this
function is not enabled, the MFP will stop
and request the correct size of paper to be
loaded.
Media Check ENABLE
DISABLE
Determines whether the MFP check the
size of paper loaded matches that required
for the document sent to print.
Resolution 600x1200DPI
600DPI M-Level
600DPI
Sets the default resolution for printing
(dots per inch). 600x1200DPI uses more
memory and requires more time to
process, but prints at a higher quality.
Toner S ave Mode OFF/ON Reduces the amount of toner used for
imaging. Toner saving gives lighter prints
but is more economical.