Quick Start Manual

- 79 -
Scanning to Local PC
4
Scanning
3 Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4 Plug the other end of the Ethernet cable
into the hub.
5 Hold down the power switch for
approximately one second to turn on the
power.
Connecting using wireless LAN
(MB451w, MB471w only):
Use the WPS (push button) function to set the
wireless LAN. For details on other methods for
setting the wireless LAN, refer to the User’s
Manual (Basic), “Network Connection”.
1 Log in as the administrator.
2 Press the to select [Network Menu],
and then press the .
3 Press the to select [Network Setup],
and then press the .
4 Press the to select [Wireless
Setting], and then press the .
5 Press the to select [Set
automatically (WPS)], and then press
the
.