Quick Start Manual

- 62 -
Scanning to Network PC
4
Scanning
3 Plug one end of the Ethernet cable into
the network interface connection on the
back of the machine.
4 Plug the other end of the Ethernet cable
into the hub.
5 Hold down the power switch for
approximately one second to turn on the
power.
 Connecting using wireless LAN
(MB451w, MB471w only)
Use the WPS (push button) function to set the
wireless LAN. For details on other methods for
setting the wireless LAN, refer to the User’s
Manual (Basic), “Network Connection”.
1 Log in as the administrator.
2 Press the to select [Network Menu],
and then press the .
3 Press the to select [Network Setup],
and then press the .
4 Press the to select [Wireless
Setting], and then press the .
5 Press the to select [Set
automatically (WPS)], and then press
the .