Quick Start Manual

- 49 -
Faxing from a Computer (For Windows)
3
Faxing (For MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)
15 When the instruction to connect the
machine to the computer and turn on
the machine is displayed, plug the other
end of the USB cable into the computer’s
USB interface connector and hold down
the power switch for approximately one
second to turn on the power.
Note
● Do not plug the USB cable into the network interface
connection. Doing so may damage your machine.
16 Click the [Finish] button.
17 Click [Exit] on the [Setup] window.
18 Click [Start] > [Devices and Printers].
19 Check that the OKI MB491(FAX) icon is
displayed.
If a printer driver for the machine is already
installed, the OKI MB491 icon may represent
these drivers. In this case, right-click the OKI
MB491 icon and select one of the menu items,
and then check that the fax driver is displayed in
the submenu.
20 Remove “Software DVD-ROM” from the
computer.
The installation is complete.