Quick Start Manual

- 47 -

Faxing from a Computer (For Windows)

Faxing (For MB451, MB451w, MB471, MB471w, MB491, ES4191 MFP only)

15 Check that the OKI MB491(FAX) icon is

displayed.

If a printer driver for the machine is already

installed, the OKI MB491 icon may represent

these drivers. In this case, right-click the OKI

MB491 icon and select one of the menu items,

and then check that the fax driver is displayed in

the submenu.

16 Remove the “Software DVD-ROM” from

the computer.

The installation is complete.

 For USB Connection

Follow the procedure below to connect a USB

cable and install a fax driver on your computer.

Note

● You must be logged in as an administrator to complete

this procedure.

Memo

● You can skip this procedure if the fax driver is already

installed on your computer.

1 Prepare a USB cable.

A USB cable is not supplied with your machine.

Prepare a USB 2.0 cable separately.

Memo

● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-

Speed connection.

2 Hold down the power switch for

approximately one second to turn off the

power.

3 Plug one end of the USB cable into the

USB interface connector on the back of

the machine.

4 Turn on the computer.

5 Insert “Software DVD-ROM” into the

computer.